Electrolux 534070 Specification Sheet

44" Single Tank Conveyor Dishwasher
with Built In Hot Water Booster WT44
Warewashing
44" Single Tank Conveyor Dishwasher
with Built In Hot Water Booster WT44
534070 (WT44BL208) 44" Conveyor Dishwasher with
Built in Booster. Left to Right - 208V
534071 (WT44BR208) 44" Conveyor Dishwasher with
Built in Booster. Right to Left - 208V
534072 (WT44BL240) 44" Conveyor Dishwasher with
Built in Booster. Left to Right - 240V
534073 (WT44BR240) 44" Conveyor Dishwasher with
Built in Booster. Right to Left - 240V
Short Form Specification
Item No. ___________________________________
Unit to be Electrolux WT44 Hot Water Sanitizing 44" single tank
conveyor dishwasher with built in hot water booster. Electrical character-
istics to be ____ 208 V or ____ 240 V three phase operation. Unit
to operate from ___ left to right or ____ right to left. Unit to feature
atmospheric built in booster system with built in rinse booster pump thus
guaranteeing rinse pressure during rinse cycle. Hot water booster
temperature rise can be selected during installation from three options,
40 °F rise (140 °F incoming water temperature), 70 °F rise (110 °F
incoming water temperature) or 100 °F rise (80 °F incoming water
temperature). Unit to have two conveyor speeds which can be selected
from the control panel by the operator, 130 racks/hour or 200 racks/hour.
Maximum water consumption at 200 racks/hour of only 79 gal/hour
(0.4 gal/rack). Unit to feature large heat and noise insulated front counter
balanced door for easy access of internal components. Powerful 2 HP
wash pump and specially designed wash spray arms to guarantee
cleaning. Unit to feature as standard end of day self cleaning cycle. Drain
of water from the machine can be done through the control panel. Large
deep drawn 26 gal wash tank.
Covered by Electrolux Platinum Star® Service Program two-year parts
and one-year labor warranty, installation start-up and performance check-
up after one year from installation.
Approval: ___________________________________________
3225 SW 42nd Street, Fort Lauderdale, Florida, 33312 • Telephone Number: 866-449-4200 • Fax Number: 954-327-6789
ITEM # _______________________________________________
MODEL # _____________________________________________
Warewashing
PROJECT NAME # ______________________________________
SIS # _________________________________________________
AIA # _________________________________________________
Main features
• Built in hot water booster (top mounted).
• Water booster temperature rise can be set on site during the
• Atmospheric booster system with air break.
• Built in rinse hot water booster pump guarantees constant rinse
• Speed of conveyor can be set through the control panel by the
• Large counter balanced inspection doors allow unrestricted all round
• Large filters sloping towards the front to the smaller pressed filter box for
• Adjustable feet for full access underneath the machine for cleaning.
• Push button self cleaning cycle of the wash and rinse zones for ease
• Wash chamber without internal pipes and therefore no hidden dirt traps.
• Self draining wash pumps provide maximum hygiene with no smells and
• Powerful 2 HP wash pump.
• Heavy duty stainless steel wash pump (impeller and housing).
• Deep drawn pressed 26 gal wash tank with fully rounded corners,
• Dishwasher structure is held together with a solid 2" × 2" stainless
• All main components made in heavy duty anti-corrosive 304 type
• Wash and rinse arms can be easily removed for cleaning.
• IPX5 (NEMA4) water protection ensures no damage from cleaning.
• Autostart/stop ensures that the machine runs only when a rack
• Internal curtains made of silastic material and are not affected by
• Electronic control panel features large display for reading of wash
• Low water consumption. At 200 racks per hour, the machine uses
• Machine predisposed for external detergent and rinse aid connections.
Included Accessories
• Vent cowls (left and right side).
• One open sided dishwasher rack for trays.
• Rack for cups.
• Rack for dinner plates.
Optional Accessories
3048424
• Ventilation activation kit.
Electrolux Professional, Inc.
www.electroluxusa.com/professional
installation of the machine. 40 °F rise (140 °F incoming water
temperature), 70 °F rise (110 °F incoming water temperature) or
100 °F rise (80 °F incoming water temperature).
pressure.
operator. 130 racks/hr or 200 racks/hr.
access to the wash and rinse area. Door is insulated with injected
foam. This adds strength as well as reduces noise and heat loss.
quick removal. Filters feature holes smaller than the concave ant-block
wash nozzles so large food cannot enter and block the wash system.
of "end of day" cleaning.
all wash and rinse zones drain automatically at the push of a button.
sloped towards the drain to prevent dirt build up provides fast
drainage in only a few minutes. Pressed wash tank with no welded
points offer a guaranteed water tight solution.
steel tube sub-frame to provide long term sturdiness.
stainless steel: tanks, panels, wash & rinse arms and caps, doors,
front, handle, rear and side-panels and rack transportation system.
is passing through it. This reduces both water and energy
consumption.
detergent or heat.
and rinse temperatures.
only 79 gal/hr (0.4 gal/rack).