Uniden BT112APT Owner's Manual page 3

To do this...
Button
Power on headset
Get into pairing mode
Multifunction
Button (MFB)
Power off headset
Refer to later sections in this manual for specific operational functions.
Increase volume on a call Press and release VOL side button.
VOL
Decrease volume on
a call
What the LED means
The BT112 has a single blue LED. It blinks or stays on according to the
current action or headset status.
If the LED...
Blinks 3 times
Blinks 4 times
Do this...
Press and hold for 3 seconds.
Press and hold for 5 seconds.
Press and hold for 4 seconds
Press and release VOL side button until the volume
level cycles through increasing the volume and
returns to the lowest volume level.
NOTE: Only the headset can adjust the volume.
It means...
The device is powering up.
The device is powering down.
3