Contents Jabra Handset 450 for CisCo oVerVieW........2 ConneCtinG ....................3 HoW to use tHe Jabra Handset 450 for CisCo ......4 teCHniCal speCifiCations..............6 Jabra HaNDSET 450 for CiSCo...
Jabra Handset 450 for Cisco, press and hold (5 secs) the mute microphone button. press the mute microphone button again, to turn back on. the Jabra Handset 450 for Cisco cannot be turned off if the cradle is plugged into a pC that is turned on.
ConneCting the Jabra Handset 450 for Cisco is plug-and-play. 1. Connect the usb cable to the handset cradle, and then plug the usb cable into any available usb port on your pC. 2. dock the Jabra Handset 450 for Cisco in the handset cradle.
HoW to use tHe Jabra Handset 450 for CisCo speaker down led indicator Mute microphone speaker up usb port answer call pick up the handset end call dock the handset in the cradle tap the Volume up or adjust speaker...
WHat tHe ligHts mean What you see What it means power on power off the Jabra Handset 450 for Cisco is in pairing mode incoming call active call Voicemail the handset is out of range of the handset cradle device firmware update mode...
360 g Dimensions: Cradle: l 211 mm x W 57 mm x H 36 mm Handset: l 203 mm x W 44 mm x H 47 mm assembled unit: l 211 mm x W 57 mm x H 60 mm Microphone:...
Need help?
Do you have a question about the HANDSET and is the answer not in the manual?
Questions and answers