Advertisement
REMOTE CONTROL OPERATION _______________________________
SUB CH . Use for the direct selection of
digital subchannels. For example: for
ECO
ONTIMER
channel 39.1 press the
followed by the dash
MUTE . Mute or restore the sound.
INFO . Displays theChannel Information
banner.
PIX SHAPE . Cycles through the various
aspect ratios. The different settings
either stretch, zoom, or fill the image
on your screen. Bars may appear on
top and bottom of your screen (or on
left and right sides) depending on the
SUB CH
broadcasted signal or program.
DYN VOL . Modifies the Dynamic
INFO
DYN VOL
Volume feature settings
MENU . Display or hide the on-screen
menu.
HELP . Displays the on-screen Help menu.
CURSORLM
cursor in the desired direction.
ENTER . Set or select the highlighted
option on the screen.
POWER . Turns your HDTV On or Off.
EXIT . Exits the on-screen menu.
INPUT . Selects the video source to
ON-SCREEN MENU
view. Holding down the key displays
the Input List.
OPERATION
ECO . Modifies the Energy Saver level.
AUDIO . Selects the desired Audio
mode. Stereo, Mono, or SAP (when
Display the On Screen menu and use
available.)
the CURSOR
ON TIMER . Displays the current switch
Channel. Press ENTER.
on time (if activated.)
Channel Search
CAPTION . Cycles through the available
Auto – Searches the detected mode,
Caption modes (when available.)
Cable or Air.
RESET . Pressing it twice restores your
Cable – Searches for analog and
HDTV to its factory settings. All user
unscrambled (ClearQAM) digital cable
customized settings will be cleared.
channels.
SLEEP . Displays the "Off" Timer. While
Air (Antenna) – Searches for analog
Off Timer is on-screen, press the "0"
and digital off-air channels.
key to Set the amount of time (in 30
minute increments) at which the HDTV
Digital Add-On – Searches digital chan-
will turn off.
nels adding newly found digital chan-
nels to the channel database.
NUMERIC KEYS . Choose a channel
directly.
CH LM . Scan through the channels in
the memory database.
VOL + – – . Increases or decreases the
audio level.
RECALL . Switch between current chan-
nel and last selected channel or input.
V-Chip (continued)
For V-Chip (TV) ratings select TV and
Display the On Screen menu and use
press ENTER. Use the CURSOR L M
the CURSOR
keys to select a rating and press ENTER.
Picture. Press ENTER.
Use the CURSOR L M keys to set the
rating's status as Blocked or Viewable.
You may choose between Vivid, Mild,
Once ratings are set, press the EXIT key
and Standard , which have predeter-
to close the V-Chip menu.
mined
values, or choose the Manual option
for customized personal settings.
NOTE: Each AV input can have its
MANUAL PICTURE SETTINGS
NOTE: Some TV ratings offer more
Manual parameters to adjust include:
detailed
settings
such
as
• Color
Dialogue, Language, Sexual,
• Contrast
and Violence.
• Sharpness
ADVANCED V-CHIP SYSTEM (RRT5)
The Detailed Setting option allows for
RRT5 (V-Chip Regional Ratings 5) is an
the adjustment of several additional
advanced V-Chip ratings system for over
parameters such as:
the air digital channels. When the HDTV
detects compatible RRT5 data, it's
• Signal Balancer • Noise Reduction
downloaded & stored in memory, and
• White Balance
the Setup V-Chip screen is then mod-
• H-Size / V-Size
ified to show the Adjust (Advanced)
option.
Use the CURSOR L M and
keys to
highlight the different options, and use
Display the On Screen menu and use
the ENTER key to block or unblock the
the CURSOR
selected rating.
Sound. Press ENTER.
NOTE: When vertical scroll bars appear,
CURSOR LM to gain
Choose sound setting option:
press
access to the additional ratings.
Auto – Sound settings are linked to
the current Picture option and param-
MORE INFORMATION
eters are adjusted accordingly.
Additional information about MPAA
(Motion Picture Association of
Dynamic, Mild, Standard –
America) and V-Chip rating can be
Predetermined sound parameters not
found
at:
www.mpaa.org
and
linked with any Picture option.
www.v-chip.org, respectively.
MANUAL SOUND SETTINGS
The Manual option provides different
parameters that can be personally
adjusted:
• Bass & Treble
1
Audyssey Dynamic Volume solves the
• Bass Extension
problem of large variations in volume level
• Audyssey Dynamic Volume
between television programs, commercials,
and between the soft and loud passages of
• Detailed Setting
movies. Audyssey Dynamic EQ is integrated
– Equalizer: Personalize audio highs
into Dynamic Volume so that as the playback
and lows.
volume is adjusted automatically, the per-
ceived bass response, tonal balance, surround
impression and dialog clarity remain the same.
IMPORTANT FACT: This HDTV maintains only
one database of digital channels. Therefore,
3
9
and
keys,
when you search for cable channels, the
database of antenna digital channels will be
– –
1
, and
keys.
deleted. You will only be able to receive those
ClearQAM channels your cable company
provides.
Channel Scan Memory
Channel Scan Memory lists all Analog
and Digital channels found. It also lists
Analog channels that were not found,
which can be added.
Use the CURSOR LM keys to move the
channel select bar through all enabled
and disabled channels.
NOTE: You can use the CH LM keys to
change page.
Press ENTER to enable or disable the
selected channel.
. Move the on-screen
TV
Channel Scan Memory
Analog
Digital
Digital
Analog
Analog
Analog
Digital
Move
CH
Page
NOTE: For information on local digital
CHANNEL
channels, visit www.antennaweb.org
Input Setting
keys to select
Input Setting feature allows the
removal of unused inputs from the AV
input loop.
Use the CURSOR LM keys to select an
AV input. Press ENTER to disable
(uncheck) or enable (check) the high-
lighted input.
TV
Channel Setting
Channel Search
Channel Scan Memory
Input Setting
Video2 Setting
Move
ENTER
NOTE: At least one input must and
will remain checked.
Unchecked box
be skipped
PICTURE
TV
Picture
Vivid
keys to select
Mild
Standard
Manual
fixed
picture
parameter
Move
ENTER
Select
ADJUSTING A PICTURE SETTING
own picture mode (pre-deter-
Use the CURSOR LM keys to highlight
mined or manual.) Current
the picture parameter you wish to
input's selected option is indi-
adjust. Press the ENTER key to enter the
cated by a blue marker.
value adjustment screen. Modify the
selected parameter's value by pressing
the CURSOR
NOTE: CURSOR LM keys select the
• Tint
next/previous parameter with-
• Brightness
out returning to the previous
menu screen.
• Color Temperature
Once adjustments are complete, press
• Edge Enhancer
the EXIT key to return to normal TV
viewing.
• Dynamic Contrast
SOUND
TV
Manual
Bass
Treble
keys to select
Bass Extension
Audyssey Dynamic Volume
Detailed Setting
Default Sound
Move
ENTER
Select
ADJUSTING A SOUND SETTING
Use the CURSOR LM keys to highlight
the sound parameter you wish to adjust.
Press the ENTER key to enter the value
adjustment screen. Modify the selected
parameter's value by pressing the
CURSOR
keys.
NOTE: CURSOR LM keys select the
next/previous parameter with-
out returning to the previous
menu screen.
1
Once adjustments are complete, press
the EXIT key to return to normal TV
viewing.
Video2 Setting
Use this feature to establish either a
Component or Composite connection
to the VIDEO INPUT 2 jacks on your
HDTV.
Use the CURSOR LM keys to select the
type of connection you'll use in VIDEO
INPUT 2.
Press ENTER, a blue mark will appear
next to the selected option indicating it
as the active option.
SETUP
Display the On Screen menu and use
the CURSOR
keys to select Setup.
03
WREG-DT
03-1
Press ENTER.
03-2
WCVB
04
WEXT
Menu Language
05
NICK
06
NICK
Choose between English, Spanish and
06-1
VBCT
French for your On Screen menu's dis-
ENTER
Select
MENU
Return
EXIT
Exit
play language.
Press ENTER on the desired language.
Digital Caption
Captioning is textual information trans-
mitted along with the picture and
sound. Turning Captioning ON (by
pressing the CAPTION key during nor-
mal TV viewing) causes the HDTV to
open
these
captions
analog) and superimpose them on the
screen.
Video1
Video2
HDMI1
HDMI2
HDMI3
USB
:Skip
Select
MENU
Return
EXIT
Exit
NOTE: Local broadcasters decide
which caption signals to transmit.
Use the CURSOR LM and
means the input will
modify
Font ,
Background,
Foreground of digital caption text.
USB INPUT
PHOTO VIEWER
Color
View pictures on your HDTV with the
Tint
use of a USB mass storage device (not
Contrast
Brightness
included.)
Sharpness
Color Temperature
HDTV BACK PANEL
Detailed Setting
Default
HDMI
(DVI)
INPUT1
MENU
Return
EXIT
Exit
Insert the flash drive into the USB port,
the TV will display the Photo Viewer
keys.
screen, select Shuffle Play or Browse
Photos and press ENTER to begin.
NOTE: A thumbnail hide icon will
appear if a picture cannot be decoded
or if no thumbnail data is available.
USING THE PHOTO VIEWER
Press ENTER on a thumbnail photo to
enable the Rotate, Full View and Start
ON
Medium
Slideshow functions.
Once in Full View mode:
Use the CURSOR
picture.
MENU
Return
EXIT
Exit
Press ENTER to show the full view
options menu.
• Rotate
• Zoom In / Out
• Pan
• Slideshow setup
• Start Slideshow
• Browse Photo
SLIDE SHOW
In the Slideshow Setup menu you may
turn the Shuffle and Quick Change
options ON or OFF .
Press ENTER on Start Slideshow
either from the Thumbnail View
Screen or from the full view options
menu to start the slideshow from the
current picture.
Energy Solution
ECO (ENERGY SAVER)
ECO controls the LED backlight bright-
ness to reduce power consumption.
– Level 1: Energy Saver feature is off.
– Level 2: Low power consumption.
– Level 3: Lowest power consumption.
Press ENTER on the desired level.
LIGHT SENSOR
This feature detects ambient room
light brightness and uses that reading
to control the panel brightness level
and picture parameters to reduce the
HDTV's power consumption.
NOTE: When room lighting is dark,
the panel brightness and/or the
picture
setting
parameters
such as brightness and con-
trast are lowered. When room
lighting is bright, parameters
are affected opposite.
Use the CURSOR LM keys to select On
or OFF and press ENTER.
AUTO SHUT-OFF
When Auto Shut-off feature is set to
ON , it will allow the HDTV to automa-
tically turn off when no video and/or
audio signals are being received.
NOTES: By factory default, this fea-
ture is set to ON. The HDTV
will automatically turn off if
no AV signals are received in
a time span of 15 minutes.
Use the CURSOR LM keys to select On
or OFF and press ENTER.
(digital
or
Mode (Home/Store)
Use the Mode (Home/Store) option if
you would like to change the initial
Energy Saving Mode chosen at HDTV's
first power on.
Home Mode - For saving energy and
power consumption reduction.
Store Mode - High brightness and
contrast for display at retailer store.
NOTE: Only Home Mode qualifies for
keys to
Energy Star.
and
Press ENTER on the desired mode.
ONE-YEAR LIMITED PARTS AND LABOR
THIS LIMITED PARTS AND LABOR WARRANTY IS VALID ONLY ON SANYO TELEVISIONS
PURCHASED AND USED IN THE UNITED STATES OF AMERICA, CANADA, AND PUERTO
RICO, EXCLUDING ALL OTHER U.S. TERRITORIES AND PROTECTORATES. THIS LIMITED
WARRANTY APPLIES ONLY TO THE ORIGINAL RETAIL PURCHASER, AND DOES NOT
APPLY TO PRODUCTS USED FOR INDUSTRIAL OR COMMERCIAL PURPOSES.
WARRANTY APPLICATION
USB FLASH
FOR ONE YEAR from the date of original retail purchase Sanyo Manufacturing
DRIVE
Corporation (SMC) warrants this TV to be free from manufacturing defects in materials and
workmanship under normal use and conditions for parts and labor.
For the FIRST 90 DAYS from the date of original retail purchase, Sanyo Manufacturing
Corporation will replace any defective TV via exchange at the retailer. To ensure proper
warranty application, keep the original-dated-sales receipt for evidence of purchase.
Return the defective TV to the retailer along with the receipt and the included
accessories, such as the remote control. The defective TV will be exchanged for the same
model, or a replacement model of equal value, if necessary. Replacement model will be
contingent on availability and at the sole discretion of Sanyo Manufacturing Corporation.
THE FOREGOING WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES
OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
OBLIGATIONS
For one year from the date of purchase, Sanyo Manufacturing Corporation warrants
this product to be free from defects in material and workmanship under normal use and
conditions. During the first 90 days under this warranty for any manufacturing defect or
malfunction Sanyo Manufacturing Corporation will provide a new TV via exchange at
the retailer.
HOW TO MAKE A CLAIM UNDER THIS WARRANTY
Please call 1-800-877-5032. Please be prepared to give us the television's model number
and serial number when you call. The model number and serial number are printed on a
label attached to the back of the unit.
For customer assistance, call toll free 1-800-877-5032.
keys to change
This warranty expresses specific contractual rights; retail purchasers may have addition-
al statutory rights which vary from state to state.
Your Sanyo HDTV is registered at the time of purchase,
please keep sales receipt for future reference.
For your protection in the event of theft or loss of this product, please fill in the
information requested below and KEEP IN A SAFE PLACE FOR YOUR OWN
PERSONAL RECORDS.
Model No. ______________________
(Located on back of unit)
Purchase date ___________________
Where Purchased _________________________
Clock Timer
This feature allows you to set a
Current Time for your HDTV and
enable a Switch On Time for the HDTV
to turn on at a specific time of day.
When On Timer Function is set to ON ,
the TV will automatically turn on at the
previously set Switch on Time .
Use the CURSOR LM and
keys to
modify the Current Time and/or Switch
On Tim e.
V-Chip
(parental control)
Use this feature to automatically block
programs with content you deem as
inappropriate for viewing by your
children.
NOTE: This feature is designed to com-
ply with the United States of
America's FCC V-Chip regula-
tions. Therefore, it may not func-
tion with broadcasts that origi-
nate in other countries.
ADJUSTING THE V-CHIP RATINGS
Select ON and press ENTER. Select
Adjust (Standard) and press ENTER.
TV
Setup
Menu Language
Off
V – Chip
On
Digital Caption
Adjust (standard)
Energy Solution
Clock Timer
Mode (Home/Store)
ENTER
Select
MENU
Return
EXIT
Exit
Move
NOTE: Blocking a rating will automati-
cally block all higher ratings.
Unblocking a rating will auto-
matically unblock all lower
ratings.
For V-Chip (Movie) ratings select Movie
and press ENTER, and then select the
desired MPAA rating limit. Press the
EXIT key to close the V-Chip menu.
WARRANTY
(EFFECTIVE: March 1, 2007)
Serial No. _____________________________
(Located on back of unit)
Purchase Price _________________________
Advertisement
