Download Print this page

Sanyo CA21KS2 Instruction Manual

Sanyo colour television instruction manual.
Hide thumbs

Advertisement

Instruction Manual
Colour Television
Flat Screen
Multi System
CATV Hyper Band
256 Programmes with Automatic Tuning
AV Stereo Sound System
DVD Input with Video Component
CA21XS2S
CP21XS2S
CA21YS2S
CP21YS2S
CA21KS2
CP21KS2
CA21KS2K
CP21KS2K
CA21SF1
CP21SF1

Advertisement

   Related Manuals for Sanyo CA21KS2

   Summary of Contents for Sanyo CA21KS2

  • Page 1: Instruction Manual

    Instruction Manual Colour Television Flat Screen Multi System CATV Hyper Band 256 Programmes with Automatic Tuning AV Stereo Sound System DVD Input with Video Component CA21XS2S CP21XS2S CA21YS2S CP21YS2S CA21KS2 CP21KS2 CA21KS2K CP21KS2K CA21SF1 CP21SF1...

  • Page 2: Warnings And Cautions

    Warning High voltages are used in the operation of this television receiver. Do not remove the cabinet back from your set. Refer servicing to qualified service personnel. Do not drop or push objects into the television cabinet slots or openings. Never spill any kind of liquid on the television receiver.

  • Page 3: Table Of Contents

    Warnings and Cautions ....2 Contents ......3 Plug &...

  • Page 4: Front Control

    Each button listed in this section has the same function as it’s corresponding Model CA21XS2S, CP21XS2S Press to open VIDEO L-AUDIO-R TV/AV MENU Model CA21YS2S, CP21YS2S Press to open AV2 IN VIDEO L-AUDIO-R 1. Mains ON/OFF Button 2. Remote Control Detector 3.

  • Page 5

    Each button listed in this section has the same function as it’s corresponding Model CA21KS2, CP21KS2, CA21KS2K, CP21KS2K Pull to open L-AUDIO-R VIDEO Model CA21SF1, CP21SF1 1. Mains ON/OFF Button 2. Remote Control Detector 3. Stand-by and Power Indicator 4. Programme UP/DOWN 5.

  • Page 6: Remote Control Transmitter

    TV / AV Selector button RECALL/COLOUR SYSTEM button Programme Selector button DIGIT button SWAP button VOLUME - button STEREO/MONO button Programme DOWN button BASS EXPANDER button SOUND MODE button Battery Installation of the Remote Control Transmitter 1. Open the battery cover. 2. Install two “AA” 1.5 volt batteries so that the “+” and “-” “...

  • Page 7: General Operation

    Remote Control Operation Standby/Power-on To switch the TV on and off. For shutting off a power supply completely, Press the Mains ON/OFF button on the front control of TV set. Sound mute -/- - To switch the sound from the speakers. The sound changes as follows; normal → mute ( -/- - -/- - Timer...

  • Page 8: Off Timer

    Off Timer The OFF TIMER will switch off the TV automatical- ly after 30 minutes, 1 hour, 1 hour and 30 minutes, or 2 hours. Press the TIMER button. Press the VOLUME ( + or - ) button to select the time period. Just one minute before switching off the TV, “OFF 0:01”...

  • Page 9: Setting Of The Sound System

    Setting of the Sound System (Semi-Auto or Manual Tuning mode ) MODE SEMI SEARCH START POSITION AUTO SYSTEM SKIP MEMORY SELECT ADJUST BACK EXIT (5.5MHz) (6.0MHz) (6.5MHz) 2) To enter a sound system selection into the memory, select “MEMORY” and press the VOLUME + or - button. MODE SEMI SEARCH...

  • Page 10: Picture Adjustment

    Basic Picture Adjustment Operation (Continued) When “PICTURE” is not selected, select “PICTURE” with the Programme UP or DOWN button. PICTURE AUDIO PRESET LANGUAGE Press the VOLUME + or - button to display Picture Adjustment menu. COLOUR BRIGHTNESS CONTRAST SHARPNESS WHITE TONE FINE TUNING Audio Adjustment Menu BASS TREBLE BALANCE...

  • Page 11: Tuning Of The Channels

    Up to 256 broadcast stations in your reception area can be stored in the electronic memory. There are three ways of tuning as follows; 1. Automatic Tuning (the basic way): All receivable channels are automatically tuned in and memorized in consecutive programme position.

  • Page 12: Channel Copy

    Channel Copy This function can be utilized after Automatic Tuning. For example, to copy a TV channel on pro- gramme position “2” onto programme position “6”; Select programme position “2” Enter to SEMI-AUTO or MANUAL tuning mode. (Refer to page 11.) Select “POSITION”...

  • Page 13: Setting Of The Private Position

    Skip Channel Set and cancel (Continued) Select “SKIP” by pressing the Programme UP or DOWN button,then press the VOLUME + or - button to set SKIP to ON. To cancel Skip Channel function, set to OFF. MODE SEMI SEARCH START POSITION SYSTEM AUTO SKIP MEMORY SELECT ADJUST BACK...

  • Page 14: Setting Of The Osd Language

    Press the MENU button for MAIN menu display. PICTURE AUDIO PRESET LANGUAGE Select “LANGUAGE “ by pressing the programme UP or DOWN button. PICTURE AUDIO PRESET LANGUAGE Press the VOLUME + or - button for Language menu display. Connecting To the Rear AV1 Input  Jacks Connecting to a Monophonic Video Recorder (AV1) You may connect the audio and video output terminals of the DVD player or VIDEO recorder to the input terminals of the TV set to enjoy the DVD and VIDEO programs.

  • Page 15: Jacks

    Connecting To the Rear AV1 Input  Jacks (Continued) When watching a video program input from the AV1 terminal, press the TV/AV button to select AV1. Whenever the TV/AV button is pressed, the mode will change as follows: TV mode You can select a TV programme while watching a playback from a VCR For example: To select programme position “9”...

  • Page 16: Connection To The Front Av2 Input Jacks

    Connecting To the Front AV2 Input  Jacks (Optional  Model) It is convenient to use the AV input jack on the front panel for equipment that is often connected and disconnected. * Model CA21SF1, CP21SF1 are not equipped with Front AV2 input terminal. Connecting To the Monitor Output  Jacks INPUT MONITOR OUT AV1/DVD (MONO) VIDEO To video and audio inputs...

  • Page 17: Aerial Connection

    Connecting Outdoor Aerial Connect the cable with a plug from a UHF (or VHF) aerial to the aerial socket on the cabinet back. Outdoor Aerial Aerial Socket For all aerial circuit problems please consult your local dealer. The surface of the cabinet can be damaged if not properly maintained. Many common household aerosol sprays, cleaning agents, solvents and polishes will cause permanent damage to the fine surface.

  • Page 18: Specifications

    * Model CA21SF1, CP21SF1 are not equipped with Front AV2 input terminal. Dimension: Model CA21SF1, CP21SF1: 580(W) x 465(H) x 381(D) mm Model CA21KS2, CP21KS2, CA21KS2K, CP21KS2K: 580(W) x 465(H) x 326(D) mm Model CA21YS2S, CP21YS2S: 598(W) x 465(H) x 396(D) mm Model CA21XS2S, CP21XS2S: 654(W) x 467(H) x 385(D) mm Weight: Model CA21SF1, CP21SF1: approx.

  • Page 19: Helpful hints - problems/solutions

    Before requesting service check the following chart. Problem: Check these Conditions / Try these solutions: No picture, Check if TV is plugged in. no sound Try a different channel, if OK, probably station trouble. Adjust Brightness or Contrast control. Poor picture, Adjust Fine Tuning.

  • Page 20

    Part No. 1AA6P1P5578-A BE4D-A (FC8-A) SANYO ELECTRIC Co., Ltd.

Comments to this Manuals

Symbols: 0
Latest comments: