Hitachi Ultravision L55S604 Owner's Manual page 17

Rear Pane| Connections
CONNECTING AN DEVICE WiTH HDMI OR DVl
CAPABiLiTY TO HDMI 1 & HDMI 2
1. Connect the HDMI or DVI to HDMI connection cable from the
output of the HDTV set top box or DVD player to the HDMI
input as shown near the Rear panel at right.
2.
With DVI output devices, connect a DVI to HDMI cabel to the
HDMI 2 input. Connect the audio out L and R cables to DVI
Audio Input or connect the audio cables from the Audio output
jack from the HDTV set top box or DVD player to an external
audio amplifier as shown to the right.
TV REAR PANEL
HDMI Input
HDMI DIGITAL
OUTPUT CAPABiLiTY
DVD Player/Recorder
HDMI HDMI
3. Press the INPUT button, then select HDMI 1 or 2 to view the
program from the HDTV set top box or DVD player.
, Completely insert the connection cord plugs when
connecting to the rear paneljacks. If you do not, the
picture and/or sound may be abnormal.
• When using a DW to HDMI cable, connect theAudio
Out L and R cables to an external audio amplifier.
• The HDMI input on HDMI 1, 2, 3 and 4 contains
the copy protection system called High-bandwidth
Digital Content Protection (HDCP). HDCP is a
cryptographic system that encrypts video signals
when using HDMI connections to prevent illegal
copying of video contents.
• HDMlisnota "NETWORK"technology. Itestablishes
a one-way, point-to-point connection for defivery of
uncompressed video to a display.
• The connected digital output device controls the
HDMI interface, so proper set-up of device user
settings determines final video appearance.
• Only HDMI 2 can support DW audio input.
TV REAR PANEL
DVl to HDMI input
DVl DIGITAL
OUTPUT CAPABILITY
DVD Player/Recorder
HDMI DVI
Or
AUDIO IN
AUDIO AMPLIFIER
Note: An external Audio amplifier can be
used for the same purpose.
CONNECTING AN EXTERNAL AUDIO AMPLIFIER
To monitor the audio level of the LCD TV to an external audio
amplifier, connect the system as shown on the right. The DIGITAL
OUT and AUDIO OUT from the Rear Panel is a fixed output. The
Volume of the amplifier is controlled by the amplifier, not by the
LCD Television.
The DIGITAL OUT jack outputs all audio sources to device with
Optical IN capability.
1. Connect an optical cable from the DIGITAL OUT to the
OPTICAL IN of a separate Stereo System Amplifier as shown
on the Rear Panel on the right.
2. Connect an RCA stereo cable from the AUDIO OUT to the
Audio input of a separate Stereo System Amplifier as shown
on the Rear Panel on the right.
TV REAR PANEL
cable
Or
• Completely insert the connection cord plugs when connecting to rear panel jacks. If you do not, the picture and/or sound
may be abnormal.
• Cable plugs are often color-coded. Match colors of plugs and jacks, Le. connect red to red, white to white, etc.
• To return to the last channel viewed, select "0. TV" from the INPUTS menu.
17