Add Channel; Delete Channel; Sleep Timer - JVC BlackCrystal JLE32BC3001 User Manual

Partial Scan Channels
You can partially scan for network signal within a specifi ed range of channels.
1
Press MENU.
2
to select "Partial Channel Scan", then press or OK.
Press or
3
to select "Scan Mode", then press or OK.
Press or
4
to select an option, then press OK.
Press or
• "Analog/Digital": scan for both analog and digital channels
• "Analog": scan for analog channels
• "Digital": scan for digital channels
5
Press or to select "From Channel", then enter a starting channel range.
6
Press or to select "To Channel", then enter an ending channel range.
7
to select "Start Scan", then press OK.
Press or
Scanning progress is displayed on the menu screen. To stop scan, select "Stop Scan" and press OK.

Add Channel

New channels may be added to your area periodically. Use the Add Channel function to add new
channels.
1
Press MENU.
2
to select "Channel", then press or OK.
Press or
3
to select "Find Channel", then press or OK.
Press or
4
Press or to select "Enter Channel", then enter a channel.
5
to select "Add Channel", then press OK.
Press
Added channels are listed on the Channel List screen.

Delete Channel

To remove a channel from the Channel List screen.
1
Press MENU.
2
to select "Channel", then press or OK.
Press or
3
to select "Channel Management", then press or OK.
Press or
4
Press or , then press OK to mark the channels that you want to remove from the
Channel List.
5
Press RETURN to close the menu screen.

Sleep Timer

Sleep timer sets the TV to automatically turn off after a preset amount of time. See page 21.
36
Adjusting the Menu Settings