Device Settings; Usable Device Specific Settings - Epson C31C391A8791 - TM U230P Two-color Dot-matrix Printer Developer's Manual

4) Port information when using Ethernet port
The port information that can be set with the SetupPOS utility is as follows.
Output buffer length [byte]
Output interval time [ms]
The default settings are as shown in the following table.
Output buffer length [byte]
Output interval time [ms]

2.4 Device Settings

The following explanation is about the settings for TM-U230.

2.4.1 Usable Device Specific Settings

For the TM-U230, the following device specific settings are settable by the
SetupPOS utility. For the detail, please refer to the Section 2 of "EPSON OPOS
ADK MANUAL APPLICATION DEVELOPMENT GUIDE POSPrinter (TM
Series)".
Tab
General
Color Bitmap
Status Log
Default Value
*1
Available only for the Multilingual character model.
Item
Item
Disable panel buttons
Assume print complete when data output finishes
Homogenize Error Codes
Ignore firmware version check
Output complete timeout
Method
Brightness
Primary
ERROR
OFFLINE
Log file name (include full path)
Maximum file size [KB]
*1
Multilingual font
6
APPLICATION DEVELOPMENT GUIDE
POSPrinter (TM-U230)
Version 2.61 Feb. 2008
Setting range
32 to 1024
0 to 9999
Setting range
1024
2500
Settings