Installing The Back Cover; Removing The Memory - Dell External XL 9010 Owner's Manual

4. Lift the cover and remove it from the computer using the notches near the input/output panel.

Installing the Back Cover

1. Place the cover on the back of the computer using the notches near the input/output panel.
2. Tighten the screws to secure the back cover to the computer.
3. Install the VESA stand.
4. Follow the procedures in

Removing the Memory

1. Follow the procedures in
2. Remove the:
a) VESA stand
b) back cover
After Working Inside Your Computer .
Before Working Inside Your Computer .
11