Dell External OEMR R620 Owner's Manual page 125

Error Code Message Information
Action
PDR1016
Message
LCD Message
Details
Action
PST0128
Message
LCD Message
Details
Action
PST0129
Message
LCD Message Memory is detected, but is not configurable. Check memory devices.
Details
Action
PSU0001
Message
LCD Message
Action
PSU0002
Message
LCD Message Predictive failure on PSU <
Details
Action
PSU0003
Message
LCD Message Power input for PSU <
Details
Action
PSU0006
Message
Remove and re-seat the failed disk. If the issue persists, see
number > is removed from disk drive bay < bay >.
Drive <
number > removed from disk drive bay < bay >. Check drive.
Drive <
The controller detected that the drive was removed.
Verify drive installation. Re-seat the failed drive. If the issue persists, see
No memory is detected.
No memory is detected. Inspect memory devices.
System BIOS was unable to detect memory in the system.
Re-seat the memory modules. If the issue persists, see
Memory is detected, but is not configurable.
System BIOS detected memory, but was unable to configure the memory for system
operation.
Compare system memory installation to supported system memory configurations.
number > failed.
Power supply <
number > failed. Check PSU.
PSU <
Remove and reinstall the power supply. If the issue persists, see
A predictive failure detected on power supply <
System performance and power redundancy may be degraded or lost.
Remove and reinstall the power supply at the next service window. If the issue persists,
see Getting Help.
The power input for power supply <
number > is lost. Check PSU cables.
The power supply is installed correctly but an input source is not connected or is not
functional.
Verify the input source is attached to the power supply. Verify the input power is within
the operating requirements for the power supply.
Power supply < number > type mismatch.
number >.
number >. Check PSU.
number > is lost.
Getting Help.
Getting Help.
Getting Help.
Getting Help.
125