Symantec 360R - Security Gateway SGS Installation Manual page 13

Table 2-1 describes the features and icons on the back panel of all the models.
Table 2-1 Symantec Gateway Security 300 Series back panel features
Location Icon
1
2
3
4
5
6
7
Installing the Symantec Gateway Security 300 Series appliance
Feature Description
Restart When you press this button, current
connections and all client VPN tunnels are
lost, all Gateway-to-Gateway VPN tunnels
that were previously connected re-establish
after the appliance restarts, and the initial
hardware self-test is run.
This button is recessed. Press it gently and
quickly with a paper clip.
LAN ports Model 320 has four Ethernet ports and
models 360 and 360R have eight Ethernet
ports to which you connect RJ-45 connectors
from the nodes that the appliance protects.
WAN port Model 320 has one Ethernet port and models
360 and 360R have two Ethernet ports to
which you connect RJ-45 connectors from an
outside network (such as an intranet) or the
Internet.
DIP switches The DIP switches are shown in the on (up)
position. The default position is off (down).
DIP switches provide additional
functionality to the appliance. Generally,
they are only used when performing tasks
that involve manually updating the
appliance.
Serial All the appliances have one serial port. If you
(modem) port use a modem and dial-up connection to
provide Internet connectivity, you connect
the modem to the serial port.
Power socket Connect the power cord.
Power on/off Turns the power supply to the appliance on
or off.
Installing the appliance
13