EVGA 200-LM-1700-KR - InterView 1700 - 17" LCD Monitor Manual page 30

Picture is dim or bright
Screen not centered correctly
Screen has one or more lines
Screen is scrambled or appears
torn
Monitor malfunctions on & off
Picture missing color
Faint shadow from the static image
displayed appears on the screen

Perform monitor reset on "Factory Reset"

Auto Adjust via OSD (ON SCREEN DISPLAY)

Adjust brightness via OSD (ON SCREEN DISPLAY)

Perform monitor reset on "Display Reset"

Auto Adjust via OSD (ON SCREEN DISPLAY)

Adjust brightness via OSD (ON SCREEN DISPLAY)

Ensure monitor is in proper video mode

Perform monitor reset on "Display Reset"

Auto Adjust via OSD (ON SCREEN DISPLAY)

Perform monitor self-test feature check and determine if these lines are also in self-test
mode

Check for bent or broken pins

Perform monitor reset on "Display Reset"

Auto Adjust via OSD (ON SCREEN DISPLAY)

Perform monitor self-test feature check to determine if scrambled screen appears in self-
test mode

Check for bent or broken pins

Boot up in the "safe mode"

Ensure monitor is in proper video mode

Ensure video cable connection to computer and to the flat panel is secure

Perform monitor reset on "Factory Reset"

Perform monitor self-test feature check to determine if the intermittent problem occurs
in self-test mode

Perform monitor self-test feature check

Check connection integrity at both end of the video cable

Check for bent or broken pins

Use the Power Management feature to turn off the monitor at all times when not in use

Alternatively, use a dynamically changing screen saver
30