Holder Assy; Motor Flexible Board - Sony MZ-R70 Service Manual

3-7. HOLDER ASSY

3-8. MOTOR FLEXIBLE BOARD

Note: Align a circular hole in the stripping paper
with a circular hole in the DC motor (sled),
when mounting the motor
flexible board.
5 Remove the holder assy to
direction of the arrow C.
1 Open the holder assy.
A
1 Remove four solders of
DC motor (sled) (M602).
4 adhesive sheet
C
4 boss
2 Remove two solders of
DC motor (over write head up/down) (M603).
3 Remove four solders of
DC motor (spindle) (M601).
DC motor (sled)
circular hole
– 11 –
B
2 Push the convex portion
toward the direction B and
open the holder assy toward
the direction A to erect uprightly.
3
5 motor flexible board