Sony MZ-R50 - MD Walkman MiniDisc Recorder Service Manual page 27

6 7 8
p key
p key
p key
Mode : 050
M
CD playback adjustment
p key
p key
*1:+ key
:= key
p key
p key
p key
p key
CD tracking gain adjustment
p key
p key
Mode : 060
Full REC
p key
p key
*2:REC key
p key
1
(To page 26)
9
Mode : 046
Low reflection CD tracking M
gain adjustment
" key
Mode : 047
Low reflection CD focus bias variable
(Cluster Display)
" key
" key
Mode : 051
CD focus search ON M
" key
Mode : 052
CD EF balance adjustment
" key
*1
Mode : 053
CD ABC level adjustment
" key
Mode : 054
Laser CD read adjustment
" key
Mode : 055
CD focus gain adjustment
" key
Mode : 056
" key
Mode : 057
CD focus bias adjustment
(Cluster Display)
" key
" key
Mode : 061
32 cluster full REC
(Cluster Display)
" key
*2
Mode : 062
REC shock
(Cluster Display)
" key
Mode : 063
32 cluster PLAY
(Cluster Display)
" key
• Adjusting Method
Note : There is basically no display for individual adjustment items.
Only such upper position titles as SERVO, AUDIO, etc.
(100s position) are displayed.
1. When the adjustment modes are set according to "Structure of
Servo Mode", the last two digits of the mode number and the
adjustment value written in the EEPROM will be displayed blink-
ing.
Mode No. (Last 2 digits)
2. When the P key is pressed, the following will be displayed and
adjustments will be performed automatically.
Mode No. (Last 2 digits)
AUTO_ADJ
Note : The adjustment value can be changed as desired using the
VOLUME + and – keys, but try to avoid this as much as
possible.
3. After the adjustments are completed, the item is displayed again
and the adjustment value that was blinking lights up.
Mode No. (Last 2 digits)
• Cluster Display
Mode No. (Last 2 digits)
026 4B 01
Cluster value
• Nothing is performed at mode numbers 070 to 073.
– 27 –
Adjustment value
52 09
(Blinks)
Display of item
Adjustment value
52 09
(Blinks)
Automatic adjustment
being performed
Adjustment value
52 08
(Lights)
Display of item
Adjustment value
52 09
(Blinks)
BLOCK error rate
AT error rate