folder are still yellow, but the folder icons of all other
folders have been changed to grey.
•
When starting recording while a pop-up message was
still displayed, the time counter would not move. This
has been fixed.
•
Marks could not be added to WAV files that were not
created by this unit. This has been fixed.
•
Some mark information could not be read. This has
been fixed.
•
The WAV bext chunk size had 2 bytes more than the
standard size. This has been fixed.
•
When the selected media was changed, the phantom
power setting would not match the setting shown on
screen in some cases. This has been fixed.
•
If there were numerous files in the root directory of a
CF card, firmware update files would not be shown.
This has been fixed.
•
Operation stability has been improved.
V1.04 fixes
•
On the
screen, if you changed a CF card
Mark List
while a mark was selected, editing the mark points
could not be conducted. This has been fixed.
•
The last added
MANUAL MARK
some cases. This has been fixed.
•
The
button did not function in
CREATE PROJECT
some cases. This has been fixed.
•
When creating a new folder, the automatically
displayed folder name was incorrect in some cases. This
has been fixed.
•
Pressing and holding a front panel key while starting
up could cause the unit to hang occasionally. This has
been fixed.
•
When creating a project, if you designated a name
that already existed on the CF card, a warning was not
displayed in some cases and the
button did not function. This has been fixed.
•
When using a PS/2 keyboard to change the single
character used in the second half of the
, the backspace and delete keys could erase that
Name
character to make the field erroneously blank. This has
been fixed.
•
On the
screen, even if the frequency was
Sync TC
correct, 44.1 kHz was not properly shown. This has
been fixed.
•
When editing the name of a project that did not
contain folders, the pop-up window would disappear.
This has been fixed.
•
If an error occurred when formatting of a CF card, an
error message was not shown. Now a message will be
shown.
•
Copying between folders that had different sampling
frequency settings was allowed mistakenly. This is now
prevented.
HS-P82
could not be cleared in
CREATE PROJECT
Next Take
Release Notes
•
If time code was displayed, when that playback was
stopped the playback starting point time code was
mistakenly displayed momentarily. This has been fixed.
V1.03 fixes
•
The adjustment curve for the
the stereo bus) of the internal mixer has been changed.
•
Some of the information stored in BWF files (timestamp
information in iXML chunks) had been erroneous. This
has been fixed.
•
After canceling the copying of a folder, folder deletion
and other operations would not complete properly.
This has been fixed.
•
When playing back after recording or skipping takes,
a time that differed from the playback time would be
momentarily output from the TIMECODE/DIGITAL
OUT (OUT 1) connector. This has been fixed.
•
A noise would be output if a take was searched forward
until its end. This has been fixed.
•
When using the
NEXT TAKE NAME
the home screen, the "UserWord" would not be saved
in rare cases. This has been fixed.
•
On the
Screen, the Fs value would be shown
PROJECT
inaccurately on rare occasions. This has been fixed.
•
When searching forward or backward, it would not be
possible to stop searching at the time when switching
from one take to another. This has been fixed.
•
When an even-numbered channel was soloed, turning
on the channel link for that channel would make it
impossible to disable the solo mode. This has been
fixed.
•
Locating to marks has been improved.
•
Incorrect data was output from the timecode generator
on rare occasions. This has been fixed.
•
The inputs timecode would not be updated on very
rare occasions. This has been fixed.
•
Using a PS/2 keyboard, Inputting characters prohibited
by FAT file systems was possible. This has been fixed.
•
When inserting a CF card that did not contain a project,
trouble would occur on rare occasions. This has been
fixed.
•
Issues related to the use of the touch panel have been
fixed.
•
When the
item on the
File Mode
was set to
or
MONO
POLY
on for only 1 channel) and the
function was turned ON, recording could exceed the
setting. This has been fixed.
MAX File Size
(level sent to
2Mix LVL
button pull-up on
screen
REC SETUP
(with the recording function
record
LR 2MIX
3
TASCAM HS-P82