Download Print this page

Pioneer AS-BT200 Operating Instructions Manual page 3

Operating instructions
Hide thumbs

Advertisement

[U.S. model only]
Information to User
Alterations or modifications carried out without appropriate authorization may
invalidate the user's right to operate the equipment.
D8-10-2_A1_En
NOTE:
This equipment has been tested and found to comply with the limits for a Class 8
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
-
Reorient or relocate the receiving antenna.
-
Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
-Consult the dealer or an experienced radio(fV technician for help.
D8-10-1-2_A1_En
CAUTION
This product satisfies FCC regulations when shielded cables and connectors are used
to connect the unit to other equipment. To prevent electromagnetic interference with
electric appliances such as radios and televisions, use shielded cables and
connectors for connections.
D8-10-3a_A1_En
[Canadian model only]
This Class
8
digital apparatus complies with Canadian ICES-003.
D8-10-1-3_A1_En
En

Advertisement

loading

  Related Manuals for Pioneer AS-BT200