Connecting To A Computer - Canon PowerShot ELPH 115 IS User Manual

• After you have accessed the Wi-Fi menu once, you can access it again by
pressing the <o> button. The recent target device is listed first, so you can
easily connect again by pressing the <o><p> buttons to choose it. To add
a new device, display the device selection screen by pressing the <q><r>
buttons, and then configure the setting.
If you prefer not to display recent target devices, press the <n> button,
and on the [3] tab, choose [Wi-Fi Settings] > [Target History] > [Off].
• To add multiple cameras, repeat the above procedures starting from step 1.
• Once a camera is added, the camera nickname will be displayed on the screen
in step 3. To connect to a camera again, simply choose the camera nickname
from the list.

Connecting to a Computer

Configure computer settings for the connection, add the computer as a
connection destination, and transfer images to the computer wirelessly
using the software CameraWindow as follows.
• When connected to a computer, the camera is used to establish the
connection and then the computer (software CameraWindow) is used to
transfer images.
Preparing to Register a Computer
Prepare to register a computer.
Checking Your Computer Environment
For computer environments that allow Wi-Fi connection with a camera, refer
to "System Requirements" (= 19).
Additionally, the software CameraWindow must be installed
• Windows 7 Starter and Home Basic editions are not supported.
• Windows 7 N (European version) and KN (South Korean version)
require a separate download and installation of Windows Media
Feature Pack.
For further details, see the following website.
http://go.microsoft.com/fwlink/?LinkId=159730
Cover Cover
Preliminary Notes and
Legal Information
Contents:
Basic Operations
Basic Guide
Advanced Guide Advanced Guide
1
Camera Basics
2
Smart Auto
Mode
3
Other Shooting
Modes
4
P Mode
5
Playback Mode
(= 19).
6 6
Wi-Fi Functions Wi-Fi Functions
7
Setting Menu
8
Accessories
9
Appendix
Index
98