Powering The Camera With Household Power - Canon PowerShot ELPH 115 IS User Manual

3
Turn the TV on and switch to
video input.
z z
Switch the TV input to the video input you
connected the cable to in step 2.
4
Turn the camera on.
z z Press the <1> button to turn the camera
on.
X X Images from the camera are now
displayed on the TV. (Nothing is
displayed on the camera screen.)
z z When finished, turn off the camera and
TV before disconnecting the cable.
•
Correct display is not possible unless the camera video output
format (NTSC or PAL) matches the TV format. To change the
video output format, press the <n> button and choose [Video
System] on the [3] tab.
• When the camera and TV are connected, you can also shoot while previewing
shots on the larger screen of the TV. To shoot, follow the same steps as when
using the camera screen.
However, AF-Point Zoom (= 45) and Stitch Assist
available.

Powering the Camera with Household Power

Powering the camera with AC Adapter Kit ACK-DC90 (sold separately)
eliminates the need to monitor the remaining battery level.
(= 57) are not
1
Make sure the camera is off.
2
Open the cover.
z z Follow step 2 in "Inserting the Battery
and Memory Card"
the memory card/battery cover, and then
open the coupler cable port cover as
shown.
3
Insert the coupler.
z z Insert the coupler facing the direction
shown, just as you would a battery
(following step 3 in "Inserting the Battery
and Memory Card"
Terminals
z z Make sure the coupler cable passes
through the port.
Coupler Cable Port
Cover Cover
Still Images Movies
Preliminary Notes and
Legal Information
Contents:
Basic Operations
Basic Guide
Advanced Guide Advanced Guide
1
2
(= 12) to open
3
4
5
6
7
(= 12)).
8 8
9
Index
Camera Basics
Smart Auto
Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories Accessories
Appendix
120