Inserting The Battery And Memory Card - Canon PowerShot ELPH 115 IS User Manual

Inserting the Battery and Memory Card

Insert the included battery and a memory card (sold separately).
Note that before using a new memory card (or a memory card formatted
in another device), you should format the memory card with this camera
(= 113).
1
Check the card's write-protect
tab.
z z Recording is not possible on memory
cards with a write-protect tab when the
tab is in the locked (downward) position.
Slide the tab up until it clicks into the
unlocked position.
2
Open the cover.
z z Slide the cover ( ) and open it ( ).
3
Insert the battery.
z z While pressing the battery lock in the
direction of the arrow, insert the battery
as shown and push it in until it clicks into
the locked position.
z z If you insert the battery facing the wrong
way, it cannot be locked into the correct
position. Always confirm that the battery
is facing the right way and locks when
Terminals Battery
inserted.
Lock
4
Insert the memory card.
z z Insert the memory card facing as shown
until it clicks into the locked position.
z z Make sure the memory card is facing the
right way when you insert it. Inserting
memory cards facing the wrong way may
damage the camera.
Label
5
Close the cover.
z z Lower the cover ( ) and hold it down as
you slide it, until it clicks into the closed
position ( ).
• For guidelines on how many shots or hours of recording can be saved on one
memory card, see "Number of 4:3 Shots per Memory Card"
Removing the Battery and Memory Card
Remove the battery.
z z Open the cover and press the battery
lock in the direction of the arrow.
X X The battery will pop up.
Cover
Preliminary Notes and
Legal Information
Contents:
Basic Operations
Basic Guide
Advanced Guide
1
Camera Basics
2
Smart Auto
Mode
3
Other Shooting
Modes
4
P Mode
5
Playback Mode
6
Wi-Fi Functions
(= 145).
7
Setting Menu
8
Accessories
9
Appendix
Index
12