LT2 B875 Mark II Twin Needle Needle Feed Split Needle Bar Lock stitcher with Large Hook (and Thread Trimmer) Specifications Application For medium materials For heavy materials For extra heavy materials Max. speed 3,000 rpm Max. stitch length 7 mm Needle bar stroke 33.4 mm Thread take-up stroke...
Page 2
LT2 B8750 Mark II Twin Needle Needle Feed Split Needle Bar Lock Stitcher, Large Hook and Thread Trimmer Ply Sensor Specifications Application For medium materials For heavy materials For extra heavy materials Max. speed 3,000 rpm Max. stitch length 7 mm Auto-presser bar lifter 8 mm Needles...
Page 3
B875 Mark II (For Standard) For normal *The specification with a maximum stitch width of 5 / 8" (15.9 mm) is available. *The ¡ symbol is a presser foot assembly with finger guard. Needle gauge Needle clamp set Needle clamp assy For medium &...
Page 4
B875 Mark II (For Standard) ( 7) : For extra heavy materials *The feed dog is different from normal parts. *The ¡ symbol is a presser foot assembly with finger guard. Needle gauge Needle clamp set Needle clamp assy Needle plate Feed dog Presser foot assy (inch)
Page 5
B875 Mark II (For Thread trimmer) For normal *The thread trimming fixed knife (part No. S07527 001) and the installation screw (part No. 148539 101) are not provided with the needle plate, so they must be ordered separately if required. *The specification with a maximum stitch width of 5 / 8"...
Page 6
B875 Mark II (For Thread trimmer) ( 6) : For heavy materials *-6 (for heavy materials) is a specification between –5 (for heavy materials) and –7 (for extra heavy materials). *The feed dog is different from normal parts. *The ¡ symbol is a presser foot assembly with finger guard. Needle gauge Needle clamp set Needle clamp assy...
Page 7
B8750 Mark II (With ply sensor and thread trimmer) For normal *The thread trimming fixed knife (part No. S07527 001) and the installation screw (part No. 148539 101) are not provided with the needle plate, so they must be ordered separately if required. *The ¡...
Page 8
B8750 Mark II (With ply sensor and thread trimmer) ( 6) : For heavy materials *-6 (for heavy materials) is a specification between –5 (for heavy materials) and –7 (for extra heavy materials). *The feed dog is different from normal parts. *The ¡...
Page 9
* Maximum stitch width and gauge part sizes that require special sewing machine processing. Model name Gauge part sizes which require special sewing machine processing Maximum stitch width (inch) (mm) LT2 B841 Over 1 1 / 2" (38.1mm) (77) LT2 B842 (Standard) Over 1 1 / 2"...