Attaching The Lace; Cording - Brother LS-2000 User Manual

UTILITY STITCHES ——————————————————————————————————————————————————

Attaching the lace

Stitch width 0
Stitch length 2-4
Needle position M
Presser foot Zigzag
Needle Single
a Place the lace under the fabric leaving a 5 mm
(1/4") overlap at the edge.
b Place the overlapping edges under the presser
foot and sew.
Note
● A decorative touch can be added by using
the Satin Stitch or a Decorative Stitch to
attach the lace.
37

Cording

Set according to the thickness of
Stitch width
the cord being used.
Stitch length F-2
Needle position M
Presser foot Zigzag
Needle Single
a Set the stitch width knob so the needle will
just clear both sides of the cording.
b Place the cord on the fabric in the position
where it will be sewn.
c Lower the presser foot making sure the cord is
centered and sew using the zigzag stitch.
Guide the cord by hand along the path which
you wish to attach it.