Download  Print this page

Cleaning The Feed Dogs - Brother LS-2000 User Manual

Users manual - english and spanish.
Hide thumbs

Advertisement

f
Remove the hook by grasping its center post
and pulling it out.
a Retaining ring
b Hook
c Hook center post
g
Use a brush to remove any accumulated lint
and thread from the retaining ring, hook,
driver and race body.
a Retaining ring
b Driver
c Race body
h
Use a cloth dampened with machine oil to
wipe the shuttle race in order to remove any
lint.
i
Clean the lint from the shuttle hook in the
same manner as described in step
j
Reassemble the hook and the retaining ring,
and push the latch levers back into position.
a Retaining ring
b Hook
c Latch lever
k
Attach the bobbin case, the presser foot and
the needle before using the machine.

Cleaning the feed dogs

CAUTION
● Make sure you unplug the machine before you
clean it. Otherwise, you may get an electric
shock or be injured.
a
Turn off the machine and unplug it.
b
Raise the needle and the presser foot, and
then remove the presser foot and the needle.
c
Remove the flat bed attachment and open the
shuttle cover at the front of the free arm.
d
Remove the needle plate by using a coin or
screwdriver to remove the screws.
e
Use a brush to clean the lint from the upper
part of the feed dogs and shuttle race body.
h
.
f
Attach the needle plate by using a coin or
screwdriver.
4
40

Advertisement

Chapters

Table of Contents

   Related Manuals for Brother LS-2000

This manual is also suitable for:

Sewing machineLs2400

Comments to this Manuals

Symbols: 0
Latest comments:
  • yazmin Oct 21, 2017 11:23:
    me encanta la maquina de coser brother desde que la uso nunca me habia gustado coser tanto en toda mi vida me han inspirado
  • Luz Santiago Apr 27, 2015 11:59:
    MI E Mail luzns79@gm​ail.com
  • Luz Santiago Apr 27, 2015 11:42:
    tengo un problema la parte de atras de base de donde esta la aguja tiene un boton negro pequeño lo precion y se salio la base de que aguanta la tela. NO se como ponder la base nuevamente​. Por favor enviame las instruccio​nes de como se instala nuevamente​.

    Gracias.