Computer Setup (Continued)
Heading
Option
Power
Resume Time (hh:mm:ss)
Management
Setup
(continued)
PnP/PCI
Reset Configuration Data
Configuration
Resources Controlled By
✎
Support for specific Computer Setup options may vary depending on the hardware
configuration.
Computer Setup (F10) Utility Guide
Description
If RTC Alarm Resume is enabled, allows you
to select what time the RTC alarm will
resume.
Disables/enables automatic reconfiguration.
Default is Disabled. Select Enabled to reset
Extended System Configuration Data (ESCD)
when you exit Setup, if you have installed a
new add-on and the system reconfiguration
has caused such a serious conflict that the
OS cannot boot.
Allows you to select whether resources are
controlled automatically or manually:
• Auto (ESCD–Extended Storage
Configuration Data)
• Manual
BIOS can automatically configure all the
bootable and Plug-and-Play-compatible
devices. If you choose Auto, you cannot
select IRQ, DMA and memory base address
fields, since BIOS automatically assigns
them.
www.hp.com
Computer Setup (F10) Utility
13