Network Boot Seq; Quick Power On Self Test; F9 Boot Menu; First Boot Device - HP Dx5150 - Compaq Business Desktop Manual

Computer Setup (F10) Utility
Computer Setup (Continued)
Heading Option
Advanced

Network Boot Seq.

BIOS Features
(continued)

Quick Power On Self Test

F9 Boot Menu

First Boot Device

Second Boot Device

Third Boot Device

Fourth Boot Device

Boot Up NumLock Status

Security Option

APIC Mode

MPS Version Control for OS

✎
Support for specific Computer Setup options may vary depending on the hardware
configuration.
8
Description
Allows you to specify the order in which
network devices (including UP NIC cards)
are checked for a bootable operating
system image.
Disables/enables the system to skip certain
tests while booting.
Enabling this feature decreases the time
required to boot the system.
Disables/enables Boot Menu
Allows you to specify which devices will
boot first, second, third, and fourth, or to
disable any of the four:
• Removable
• Hard Disk
• CDROM
• Network
• Disabled
✎
MS-DOS drive lettering assignments
may not apply after a non-MS-DOS
operating system has started.
Allows you to set the default NumLock status
off or on.
Allows you to set the security option to Setup
or Always.
Disables/enables the APIC mode.
Allows you to set the MPS table version to:
• 1.1
• 1.4
www.hp.com Computer Setup (F10) Utility Guide