Table of Contents
Advertisement
Point-to-Point Protocol over Ethernet (PPPoE)
1.
Repeat the step 1–2 of Using a static IP to start the PPPoE
network configuration.
Select the type of connection you are using and click Next.
2.
3.
Select the hardware that you want to use to make your
connection and click Next.
4.
Enter your user name and password and click Next.
5.
Enter a name for this connection and click Next.
Click Finish to apply the settings or click Back to make changes.
6.
Select Connect automatically at system startup or Start
this connection when finished based on your individual
configuration.
Wireless Point-to-Point Protocol over Ethernet
1.
Repeat the step 1–2 of Using a static IP to start the wireless
PPPoE network configuration.
2.
Select the type of connection you are using and click Next.
3.
Select the hardware that you want to use to make your
connection and click Next.
Click the Browse Wireless Networks button to search for the
4.
network point you would like to connect.
5.
Enter the wireless channel information from your service
provider and click Next.
6.
Set the encryption information for the wireless connection and
click Next.
7.
Enter your user name and password and click Next.
Enter a name for this connection and click Next.
8.
Click Finish to apply the settings or click Back to make changes.
9.
4-4
Chapter 4: Using the Eee PC
Advertisement
Table of Contents
