Selecting Combined Embroidery Patterns; Reducing Character Spacing - Brother Innov-ís 4000D Operation Manual

■ Selecting combined embroidery patterns

When patterns are combined in the Embroidery Edit
screen, patterns can be selected by clicking them.
Move the mouse to position the pointer over the
desired pattern, and then click the left mouse
button. In addition, patterns can be selected by
directly touching the screen with your finger or
touch pen.
Memo
• If a pattern that is overlapping cannot be selected,
touch
6
in the screen to select it.

Reducing Character Spacing

In the Embroidery Edit screen, the spacing between
characters can be reduced to 50% of the narrowest
character in the group.
Note
• It is not recommended to edit data and transfer to
other or older version machines. Same features do
not apply in other machines, so problems may
occur.
• Character spacing can be reduced only when
characters are arranged normally on a straight line.