Brother Innov-ís 4000D Installation Manual page 6

b
Insert the CD-ROM into the computer's CD-
ROM drive.
c
Open drive D (when drive D is the CD-ROM
drive) of My Computer, double-click
then start the Certification Key Issuing
Wizard.
Memo
• The following procedure can be used to start the
Certification Key Issuing Wizard.
1. Click Start.
2. Click Run.
→ The
Run
dialog box appears.
3. Type in the path (D:\KeyWizard.exe) to the
application file, and then click OK.
→ The Select Language dialog box automatically
appears.
d
Select the desired language, and then click
OK.
→ Version 3.0 Certification Key Issuing Wizard
appears.
4
e
Read the information that appears, and then
click Next.
, and
f
Type in the 15-digit CD key found on the label
attached to the CD case of the upgrade kit, and
then click Next.
If the following message appears
Check for the following. To close the message,
click OK.
• Are symbols or characters other than letters and
numbers entered?
• Has the number "1" or the uppercase letter "I" been
incorrectly entered?
• Has the number "0" or the uppercase letter "O"
been incorrectly entered?