User Controls; Mechanical Characteristics - BenQ G2010WP Service Manual

3.9 User Controls

User's hardware control definition:
CONTROL KEY
A. When OSD displays, press [MENU] to return to previous level menu
B. When OSD isn't shown on screen, press [MENU] to enter OSD interface
[MENU]
C. Press [MENU] to enter Service Page When OSD isn't shown on screen in Service Page
A. When OSD displays, press [Enter] to perform function of menu icon that is highlight or
[Enter]
B When OSD isn't shown on screen, press[Enter] to change input source
A. When "MENU OSD" displays, press these keys to change the contents of an adjustment item,
[ ], [ ]
B. When "MENU OSD" un-displays, press [ ] to Show Picture Mode Menu.press [ ] to show
[POWER]
Power on or power off the monitor
[iKey]
press [iKey] to perform auto-adjustment

3.10 Mechanical Characteristics

3.10.1Dimension
Item
Bezel opening
Monitor without stand
Monitor with stand
Carton Box(outside)
Tilt and Swivel range
3.10.2 Weight
Item
Monitor (Net)
Monitor with packing(Gross)
3.10.3 Plastic
Item
Flammability
Heat deflection to
UV stability
resin
Mode
enter next level menu
or change an adjustment value
Brightness/Contrast Menu
condition
Lx W
L×W×Hmm
L×W×Hmm
L×W×Hmm
condition Spec
4.07±0.0.5 Kg ( Net )
5.12±0.5Kg( Gross / with packing )
condition
ABS
ABS
KEYS FUNCTION
Spec
435.73x273.19mm
472.54x166.66x383.67mm
472.73x62.2x373.35mm
538x134x446mm
Tilt:-5~21degree
Swivel: 0 degree
Spec
94-HB
80°C
Delta E<12
ABS
14
OK NA
√
√
√
√
√
OK NA Remark
√
√
OK NA Remark
√
√
√
√
Remark