Installing The Processor Fan Heat Sink; Install Processor; Close The Load Plate - Intel D925XHY Product Manual

Intel Desktop Board D925XHY Product Guide
6. Hold the processor with your thumb and index fingers oriented as shown in Figure 9. Make
sure fingers align to the socket cutouts (see Figure 9, F). Align notches (see Figure 9, G) with
the socket see (Figure 9, H). Lower the processor straight down without tilting or sliding the
processor in the socket.
7. Pressing down on the load plate (Figure 10, I) close and engage the socket lever (Figure 10, J).

Installing the Processor Fan Heat Sink

Desktop Board D925XHY has an integrated processor fan heat sink retention mechanism (RM).
For instructions on how to attach the processor fan heat sink to the integrated processor fan heat
sink RM, refer to the boxed processor manual or the Intel World Wide Web site at:
http://support.intel.com/support/processors/pentium4/intnotes478.htm
30
G
G
H
F
Figure 9. Install Processor
J
I
Figure 10. Close the Load Plate
H
F