Setting The Bios Configuration Jumper Block; Location Of The Bios Configuration Jumper Block; Jumper Settings For The Bios Setup Program Modes - Intel D925XHY Product Manual

Intel Desktop Board D925XHY Product Guide

Setting the BIOS Configuration Jumper Block

CAUTION
Always turn off the power and unplug the power cord from the computer before changing the
jumper. Moving the jumper with the power on may result in unreliable computer operation.
The location of the desktop board's BIOS configuration jumper is shown in Figure 25.
Figure 25. Location of the BIOS Configuration Jumper Block
The three-pin BIOS jumper block enables all board configurations to be done in BIOS Setup.
Table 9 shows the jumper settings for the Setup program modes.
Table 9.

Jumper Settings for the BIOS Setup Program Modes

Jumper Setting
3
1
1 3
48
1 3
Mode
Normal (default) (1-2)
Configure (2-3)
Recovery (None)
Description
The BIOS uses the current configuration and passwords for
booting.
After the Power-On Self-Test (POST) runs, the BIOS
displays the Maintenance Menu. Use this menu to clear
passwords.
The BIOS recovers data from a recovery diskette in the
event of a failed BIOS update.
OM19135