Table of Contents
Advertisement
6. SOFTWARE REFERENCE
6.8.4 AutoShade R2.0 Setup
1. The following procedures assume that
(1) You have completed the "unpack & copy" procedure (section 6.8.1.2).
(2) Your ADI 4.2 drivers are located in C:\ADI42.
2. Add the following settings to your batch file for AutoShade R2.0 ( e.g.,
SHADE2.BAT) or to your "AUTOEXEC.BAT" file.
(a) For display driver setting, SET DSPADI=\ADI42\RCPSIS.EXP.
(b) For rendering driver setting, SET RDPADI=\ADI42\RCPSIS.EXP.
3. Delete the configure file SHADE.CFG.
4. Type SHADE2 <Enter> to re-configure the AutoShade.
5. When prompted to "Select display device:", choose "P386 AutoDesk Device
Interface display driver."
6. When prompted to "Select rendering display driver:", choose "P386 AutoDesk
Device Interface rendering driver."
7. Go through all the procedures. The system starts with the selecte display setting.
6.8.5 3D Studio Version 3.0 Setup
1. The following procedures assume that
(1) You have completed the "unpack & copy" procedure (section 6.8.1.2).
(2) Your ADI 4.2 drivers are located in C:\ADI42.
2. Create your own 3D Studio V3.0 batch file (e.g., 3DS3.BAT) and add the follow-
ing settings to it, or add the following settings to your "AUTOEXEC.BAT" file.
(1) SET RCPADI=C:\ADI42\RCPSIS.EXP
(2) SET RDPADI=C:\ADI42\RCPSIS.EXP
3. Execute the new 3DS batch file or reboot the computer using the new
"AUTOEXEC.BAT" to make the new settings effective.
4. Change your current working directory to \3DS3 (where your 3D Studio V3.0
usually resides).
5. Delete the original configuration file "3DADI.CFG".
6. Type 3DS VIBCGF <Enter> to configure your display environment.
7. After the "Company Register Screen" appears, press <Enter> to continue.
92
ASUS SP98-N User's Manual
Advertisement
Table of Contents
