Electrical Considerations; Dc Loading; Add-In Board Considerations; Fan Connector Current Capability - Intel D845PEMY Specification

Intel Desktop Board D845PEMY Technical Product Specification

2.11 Electrical Considerations

2.11.1 DC Loading

Table 30 lists the DC loading characteristics of the board. This data is based on a DC analysis of
all active components within the board that impact its power delivery subsystems. The analysis
does not include PCI add-in cards. Minimum values assume a light load placed on the board that is
similar to an environment with no applications running and no USB current draw. Maximum
values assume a load placed on the board that is similar to a heavy gaming environment with a
500 mA current draw per USB port. These calculations are not based on specific processor values
or memory configurations but are based on the minimum and maximum current draw possible from
the board's power delivery subsystems to the processor, memory, and USB ports.
Use the datasheets for add-in cards, such as PCI and AGP, to determine the overall system power
requirements. The selection of a power supply at the system level is dependent on the system's
usage model and not necessarily tied to a particular processor speed.
Table 30.

DC Loading Characteristics

Mode
Minimum loading
Maximum loading

2.11.2 Add-in Board Considerations

The Desktop Board D845PEMY is designed to provide 2 A (average) of +5 V current for each add-
in board. The total +5 V current draw for add-in boards for a fully loaded Desktop Board
D845PEMY (all four expansion slots filled) must not exceed 8 A.

2.11.3 Fan Connector Current Capability

CAUTION
The processor fan must be connected to the processor fan connector, not to a chassis fan
connector. Connecting the processor fan to a chassis fan connector may result in onboard
component damage that will halt fan operation.
Table 31 lists the current capability of the fan connectors on the Desktop Board D845PEMY.
Table 31.

Fan Connector Current Capability

Fan Connector
Processor fan
Front chassis fan
Rear chassis fan
52
DC Power +3.3 V +5 V
190.00 W 5.00 A 11.00 A
286.00 W 11.00 A 15.00 A
Maximum Available Current
1000 mA
600 mA
600 mA
DC Current at:
+12 V -12 V
9.00 A 0.03 A
13.00 A 0.10 A
+5 VSB
0.60 A
1.40 A