System Agent Configuration; Pch Configuration; Sata Configuration - Asus SABERTOOTH P67 User Manual

3.5.2

System Agent Configuration

EFI BIOS Utility - Advanced Mode
Main
Back Advanced\
System Agent Configuration
Initate Graphic Adapter
Initiate Graphic Adapter [PEG/PCI]
Allows you to decide which graphics controller to use as the primary boot device.
Configuration options: [PCI/PEG] [PEG/PCI]
3.5.3

PCH Configuration

EFI BIOS Utility - Advanced Mode
Main
Back Advanced\
PCH Configuration
High Precision Timer
High Precision Timer [Enabled]
Allows you to enable or disable the High Precision Event Timer.
Configuration options: [Enabled] [Disabled]
3.5.4

SATA Configuration

While entering Setup, the BIOS automatically detects the presence of SATA devices. The SATA
Port items show Not Present if no SATA device is installed to the corresponding SATA port.
EFI BIOS Utility - Advanced Mode
Main
Back Advanced\
SATA Configuration
SATA Mode
S.M.A.R.T. Status Check
SATA 6G_1 (Brown)
SATA 6G_2 (Brown)
SATA 3G_3 (Black)
SATA 3G_4 (Black)
SATA 3G_5 (Black)
SATA 3G_6 (Black)
3-16
Ai Tweaker
Advanced
System Agent Configuration >
Ai Tweaker Advanced
PCH Configuration >
Ai Tweaker Advanced
SATA Configuration >
ASUS CB-521 ATAPI
Monitor Boot
Select which graphics controller to
use as the primary boot device.
PEG/PCI
Monitor Boot
Enabled/Disabled the High Precision
Event Timer.
Enabled
Monitor Boot
(1) IDE Mode. (2) AHCI Mode. (3)
RAID Mode.
AHCI Mode
Enabled
Not Present
Not Present
Not Present
Not Present
Not Present
Exit
Tool
Exit
Tool
Exit
Tool
Chapter 3: BIOS setup