Asus P8Z68-V LX User Manual page 43

5. Intel Z68 Serial ATA 6.0 Gb/s connectors (7-pin SATA6G_1/2 [gray])
®
These connectors connect to Serial ATA 6.0 Gb/s hard disk drives via Serial ATA 6.0
Gb/s signal cables.
If you installed Serial ATA hard disk drives, you can create a RAID 0, 1, 5, and 10
configuration with the Intel
chipset.
P8Z68-V LX
P8Z68-V LX SATA 6.0Gb/s connectors
• These connectors are set to [AHCI Mode] by default. If you intend to create a Serial ATA
• When using NCQ, set the SATA Mode in the BIOS to [AHCI Mode]. Refer to section
• You must install Windows
ASUS P8Z68-V LX
Rapid Storage Technology through the onboard Intel
®
RAID set using these connectors, set the SATA Mode item in the BIOS to [RAID Mode].
Refer to section SATA Configuration for details.
SATA Configuration for details.
ATA hard disk drives. The Serial ATA RAID feature is available only if you are using
Windows XP SP3 or later versions.
®
SATA6G_2 SATA6G_1
XP Service Pack 3 or later versions before using Serial
®
Z68
®
1-31