Getting Started; Charging The Battery Pack - Sony Handycam HDR-CX380 Operating Manual

Getting started

Charging the battery pack

For information on your camcorder model, see the following page:
Functions and equipment  p.12
1
Close the LCD screen and attach
the battery pack.
Align the indentation on the camcorder

and projection on the battery pack, then
slide the battery pack upwards.
To remove the battery pack, close the

LCD screen, then slide the BATT (battery)
release lever and remove the battery pack.
2
Connect the AC Adaptor () and
the power cord (mains lead) () to
your camcorder and the wall outlet
(wall socket).
The POWER/CHG (charge) lamp turns

orange.
The POWER/CHG (charge) lamp turns off

when the battery pack is fully charged.
GB
1
Battery pack

DC plug
Align the  mark on the DC plug
with that on the DC IN jack
POWER/CHG
(charge) lamp

To the wall outlet
(wall socket)
DC IN jack