Removing the SATA Board
1. Perform the
"Removing the Palmrest Module/Upper
page 3-19.
2. Remove the screw securing the SATA board to the mainboard.
Figure 3-32. SATA Board Screw
Table 3-32. Screw
Step
SATA Board Disassembly
3. Detach the SATA board from the mainboard.
Figure 3-33. SATA Board
NOTE:
NOTE:
A circuit board that is > 10cm
Figure
3-33. Follow the local regulations for disposing this type of circuit board.
Machine Maintenance
Case" procedure described on
Screw
M2 × L3
2
has been highlighted with a yellow rectangle in
Quantity
Screw Type
1
0
3-27