Asus P8P67 LE User Manual page 44

8. Intel P67 Serial ATA 6.0Gb/s connectors (7-pin SATA6G_1/2 [gray])
®
These connectors connect to Serial ATA 6.0 Gb/s hard disk drives via Serial ATA 6.0
Gb/s signal cables.
P8P67 LE
P8P67 LE Intel
• These connectors are set to [AHCI Mode] by default. If you intend to create a Serial ATA
• Before creating a RAID set, refer to the RAID Supplementary Guide included in the
• You must install Windows
• When using hot-plug and NCQ, set the SATA Mode item in the BIOS to [AHCI Mode].
1-32
SATA6G_1
SATA 6.0 Gb/s connectors
®
RAID set using these connectors, set the SATA Mode item in the BIOS to [RAID Mode].
See section 2.5.4 SATA Configuration for details.
folder named Manual in the support DVD.
hard disk drives. The Serial ATA RAID feature (RAID 0, 1, 5, and 10) is available only if
you are using Windows
See section 2.5.4 SATA Configuration for details.
SATA6G_2
GND GND
RSATA_TXP2
RSATA_RXN1
RSATA_TXN2
RSATA_RXP1
GND
GND
RSATA_TXN1 RSATA_RXP2
RSATA_TXP1 RSATA_RXN2
GND GND
XP Service Pack 3 or later version before using Serial ATA
®
XP SP3 or later version.
®
ASUS P8P67 LE