Boot Sequence SOP
The Boot Sequence SOP allows users to select the sequence of boot device from the command
prompt.
Boot the computer to display the command prompt.
1.
Type BS to execute the BS.exe. The Boot Sequence Selection screen appears.
2.
Select desired boot sequence in the following format: BS [selection 1to 4].
3.
For example, to select set 1, type BS 1, then press Enter.
A "Set successful" message appears if the setting is successful.
4.
2-13
*** Boot Sequence Selecter by SMI ***
Created by Miles Chen 2011/12/28. Version 1.0
Usage:
BS [ 1 : 2 : 3 : 4 ]
BS 1: [Floppy] => [HardDisk] => [CD-ROM] => [LAN]
BS 2: [HardDisk] => [CD-ROM] => [LAN] => [Floppy]
BS 3: [CD-ROM] => [HardDisk] => [LAN] => [Floppy]
BS 4: [LAN] => [Floppy] => [HardDisk] => [CD-ROM]
Figure 2:13. Execute BS.exe
C:\>BS 1
Set successfully.
Figure 2:14. Select Boot Sequence Status
System Utilities