What To Do If - AEG LAVATHERM 37320 electronic Operating Instructions Manual

What to do if ...

If the tumble dryer is not working correctly please carry out the follow-
ing checks before calling out an engineer.
The tumble dryer will not start
The results are unsatisfactory
The drum illumination does
not work
The drying process takes
unusually long
24
Symptom Possible cause
The appliance is not
plugged in
The fuse has blown
The START/PAUSEbutton
has not been pressed
No programme has been
selected
The door is not properly
closed
The wrong programme
has been selected
Fluff filter blocked
The tumble dryer has
been overloaded
Laundry not sufficiently
spun prior to tumble
drying
A residue may have
formed on the drum
interior, blocking the
sensors
Is the tumble dryer
plugged in
The programme selector
is in the OFF position
The bulb needs replacing
The vent hose may be
obstructed
Fluff filter is clogged
Solution
Plug in the appliance
Check the fuse
Press the START/PAUSE
button
Select the required
programme
Close the door
Select a different
programme
Clean the fluff filter
Observe the maximum
loads stated for each
programme
Ensure the wash load is
well spun before tumble
drying
Clean the inside of the
drum with white vinegar
Plug in the tumble dryer
Turn the programme
selector dial to LIGHT
Replace bulb
Check the vent is not
blocked or squashed
Clean the fluff filter