Cleaning The Drum; Clean Operating Screen And Housing; What To Do If; Troubleshooting By Yourself - AEG LAVATHERM 55840 User Manual

Table of Contents

Advertisement

Available languages

Available languages

80

What to do if ...

5. Use the handle to pull the heat exchanger
out of the base and carry it horizontally
to prevent any remaining water from
spilling.
6. To empty the heat exchanger, hold verti-
cally over a washing-up bowl.
CAUTION!
Do not use sharp objects to clean. The heat
exchanger could develop leaks.
7. Clean heat exchanger.
It is best to use a brush or to rinse thoroughly with a hand-held shower.
8. Replace heat exchanger and lock into place (turn both lock washers outwards until they
snap into place).
9. Close door in plinth.
CAUTION!
Never operate the dryer without the heat exchanger.

Cleaning the drum

CAUTION!
Do not use abrasives or steel wool to clean the drum.
Lime in the water or cleaning agents may form a barely visible lining on the inside of the
drum. The degree to which the laundry has been dried is then no longer detected reliably.
The laundry is damper than expected when removed from the dryer.
Use a standard domestic cleaner (e.g. vinegar-based cleaner) to wipe down the inside of
the drum and drum ribs.

Clean operating screen and housing

CAUTION!
Do not use furniture cleaners or aggressive cleaning agents to clean the machine.
Use a damp cloth to wipe down the operating screen and housing.
What to do if ...

Troubleshooting by yourself

1)
Problem
Dryer does not
work.
Unsatisfacto-
ry drying re-
sults.
Possible cause
Dryer not connected to mains supply.
Loading door opened.
The START PAUSE button not pressed.
Incorrect programme set.
Fluff filters clogged.
Remedy
Plug in at mains socket. Check fuse in
fuse box (domestic installation).
Close loading door
Press the START PAUSE button.
Set suitable programme.
3)
Clean fluff filters.
2)

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents