Sony KDL40W5500U Operating Instructions Manual page 39

Programme Labels
Programme Block
Intelligent Picture
Manual Programme
Preset
Assigns a channel name of your choice, up to five letters or numbers. The name
appears briefly on the screen when you select the channel.
1
Press F/f to select the channel you want to name, then press
2
Press F/f to select the desired letter or number ("_" for a blank space), then
press g.
If you enter a wrong character
Press G/g to select the wrong character. Then, press F/f to select the correct
character.
3
Repeat step 2 until you finish entering the name.
4
Press to exit the labeling procedure.
Blocks an individual channel from being watched.
1
Press F/f to select the channel you want to block, then press
2
Press F/f to select "Block," then press
To watch the channel, select "Allow."
On with Indicator Automatically reduces the picture noise. The signal level bar
is displayed when the channel is changed or the display is
changed from an input screen to a TV programme.
On
Automatically reduces the picture noise.
Off
Turns off the "Intelligent Picture" feature.
To preset a channel, press PROG +/– to select the programme number, before
selecting "Label," "AFT," "Audio Filter," "Skip," "LNA" or "Colour System." You
cannot select a programme number that is set to "Skip" (page 39).
Programme/ Presets programme channels manually.
1
TV System/
Frequency
2
3
4
5
6
Label Assigns a name of your choice to the selected channel. This
name appears briefly on the screen when you select the
channel.
To input characters, follow steps 2 to 4 in "Programme
Labels" (page 39).
AFT
Allows you to fine-tune the selected channel manually if you
feel that a slight tuning adjustment may improve picture
quality.
When "On" is selected, fine tuning adjustments are made
automatically.
Audio Filter
Improves the sound of individual channels when distortion
occurs in mono broadcasts (normally set to "Off").
~
• You cannot receive stereo or dual sound when "Low" or
"High" is selected.
Skip Skips unused analogue channels when you press PROG +/–
to select channels. To select channels you have programmed
to skip, use the corresponding number buttons.
.
Press F/f to select "Programme," then press
Press F/f to select the programme number you want to
manually tune (if tuning a VCR, select programme 0),
then press .
Press F/f to select "TV System," then press
Press F/f to select the best received TV broadcast
systems, then press .
Press F/f to select "Frequency," then press
Press G/g to search for the next available channel. The
frequency band ("VHF Low," "VHF High" or "UHF") is
changed accordingly.
.
.
.
.
.
39
(Continued)
GB