Keurig Platinum B70 Owner's Manual page 7

SECTION 2 Controls & Indicators (LCD Control Center)
simply press the Power Button and you can
15
fig.
brew as soon as the water is heated and the
"READY TO BREW" indicator is displayed on
the LCD Control Center.
H M
NOT READY
NOTE : The On time and Off time functions
operate independently from one another. To
SET CLOCK
AUTO OFF
ONOFF TIME cancel either function, follow the steps above
BREW TEMP
BREW SIZE
and use the "H" and "M" Buttons to advance to
12:00 AM. When you reach 12:00 AM,
MENU
the Control Center will display 'OFF' and the
function will be disabled (fig. 15).
MENU
NOTE: The Auto Off timer and the On/Off Time
programming options operate independently,
Set BREW Set
Hours Minutes but can also be programmed to work together.
For example, you can set the On Time function to
turn on at 7:00 AM and then set the Auto Off timer
function to turn off the Brewer two hours after
the last brew.
Programming Brew Temperature (187° – 192º F)
The Brewer brews at a preset temperature of 192°. You can adjust this
temperature down by 5 degrees if you prefer a cooler cup of coffee, tea
or hot cocoa. Simply follow the instructions below.
16 1. Press the MENU Button on the LCD Control
fig.
Center five times to program the Brew
Temperature feature.
The LCD Control Center will now display
- + 2.
NOT READY
the programming options with a small
CLOCK arrow next to "SET BREW TEMP" (fig. 16).
AUTO OFF SET
ONOFF TIME SET Also, the temperature 192° (initial setting)
SET BREW TEMP
BREW SIZE
will be displayed at the top of the LCD
Control Center to indicate the current
MENU
temperature setting.
A minus sign will appear over the Left
3 .
MENU
Button and/or a plus sign over the Right
Button. Use these Buttons to raise or lower
- +
BREW
the temperature one degree at a time.
Once you have reached your desired brew
4.
temperature, press the MENU Button twice
to exit the programming mode. "BREW TEMP
SET" will be displayed in the LCD Control
Center if you have changed it from 192°.
12
5. To change the brew temperature again, repeat steps 1 through 3 to change
the temperature up or down, remembering that the temperature can only
be between 187° and 192° .
NOTE: At high altitudes (over 5,000 feet) if boiling occurs use the tempera-
ture adjustment (+0 and -5 degrees) to lower the temperature.
Programming Your Brew Size
The Brewer is preset with the Small Mug
17
fig.
(7.25 oz.) as the default brew size. The default
brew size allows the user to avoid scrolling
through brew sizes if a particular size is
READY chosen most often.
TO BREW
To change the default brew size to your
desired brew size:
1. Press the MENU Button six times.
MENU
2. Using Left and Right Buttons, select your
desired default brew size (fig. 17).
MENU
Once the desired default brew size is selected
3.
press the MENU Button once to exit. The LCD
BREW
will display the brew size set.
SECTION 3
Cleaning & Maintenance
Cleaning External Parts
Regular cleaning of the Brewer's external components is recommended.
Never immerse the Brewer in water or other liquids. The Housing
1.
and other external components may be cleaned with a soapy, damp,
non-abrasive cloth.
2. The Drip Tray can accumulate up to 12 ounces of overflow. The Drip Tray
and Drip Tray Plate should be periodically inspected and rinsed clean.
To remove the Drip Tray Assembly, simply slide it toward you, keeping it
level at all times to avoid spilling. The Drip Tray and Drip Tray Plate should
not be placed in the dishwasher. They should be cleaned with a damp,
soapy, non-abrasive cloth and rinsed thoroughly.
Cleaning the K-Cup holder
assembly
18
fig.
The K-Cup Holder
1. Cleaning the Parts —
Assembly can be placed onto the top shelf of a
dishwasher. NOTE: Use low temperature cycles
To remove from the Brewer,
in the dishwasher.
open the cover by lifting the Handle. Grasp the
top of the K-Cup Holder with one hand while
pushing up on the bottom of the K-Cup
from underneath with the other until it releases
(fig. 18). After cleaning, align the K-Cup Holder
with the opening using the two front ribs as a
guide, and snap into place from the top.
13
® Holder