Memory Viewer Function - Sanyo WXU700 - WXGA LCD Projector Owner's Manual

Memory Viewer function

Memory Viewer function
The Memory Viewer function is to make a presentation or project an image without using computers
or some other external equipment. You do not have to carry a computer or other equipment to project
images.
Store images on a dedicated USB (Universal Serial Bus) thumb drive and insert it into the USB port
(Series A) of the projector, then you can project those images.
Notes for Windows
This projector is also equipped with dedicated Network Viewer 5 software to edit the presentation
images to project with the Memory Viewer function. With this function, you can edit images, photo
data, or Power Point data into a more effective presentation data. For further information of the
Network Viewer software, see the chapter "9. Network viewer function" on the separated "Network
Owner's manual for Windows".
Which images can be projected with the Memory Viewer function?
With the Memory Viewer function, you can project images in these formats below.
• Bitmap data
• PNG data
• GIF data (Animation GIF is not supported.)
• JPEG data converted with the Network Viewer 5 [File Converter 1 and 2] software.
• Text data
• Movie file (Supporting file formats are Mpeg1, Mpeg2, Mpeg4, H.264 and VC-1.)
• Program file created with the Network Viewer 5 [Program Editor].
* Some data may not be projected even with these formats. In that case, convert that kind of
data into JPEG data with the Network Viewer 5 [File Converter 1 and 2] software.
Text data used with Memory Viewer
Memory viewer supports the text file with the ASCII format for single byte. Other text formats cannot
be supported.
Back up the data
It is recommended that important data to edit with Network Viewer and store in USB thumb drive
should be stored in other media in advance. We are not responsible for any data losses or damages
resulting from use of the Memory Viewer function.
Trademarks
Microsoft, Windows, and PowerPoint are either registered trademarks or trademarks of Microsoft
Corporation in the United States and/or other countries. Macintosh is a registered trademark of Apple,
Inc. in the USA and other countries. PowerPC is a registered trademark of IBM Corporation. Intel Core is
a registered trademark of Intel Corporation in the USA and other countries.
Each name of corporation or product in this owner's manual is either a registered trademark or a
trademark of its respective corporation.
• The On-Screen Menu and figures in this manual may differ slightly from the product.
• The contents of this manual are subject to change without notice.