Selection Of Menu; Image Viewer In The Manual Mode; Image Viewer In The Program Mode For Windows - Sanyo WXU700 - WXGA LCD Projector Owner's Manual

Memory Viewer function

Selection of menu

1. To select the menu, press AUTO SET/CANCEL button in the memory viewer mode. The cursor moves
from file selection window to menu.
2. Select the sub-menu with point buttons and press SELECT button. To cancel the selection, press
AUTO SET/CANCEL button.

Image viewer in the manual mode

1. Select "Manual mode" from "Menu" on the browser window of the memory viewer and press SELECT button.
2. Select a file to display with point buttons and press SELECT button. The selected file image is
displayed on the screen.
3. During displaying the image, you can switch the displayed image with the Point ed buttons, and
start auto-playback with the Point 8 button. Refer to the control buttons as described in the table
on the next page.

Image viewer in the program mode for Windows

1. Select "Program mode" on "Menu" of the browser window of the memory viewer. And press SELECT
button. The program files (.dpf ) in the DispParam folder under the current directory are displayed.
* If the DispParam folder is not placed in the current directory, the list of the folder name is displayed.
Find the DispParam folder which stores the program file manually to display the contents of the
folder.
2. Select a program file with point buttons and press SELECT button. The dialogue window appears
and select "Yes" and press SELECT button to start the auto display. The images programmed by
program file are displayed on the screen. The display period of the image and the number of repeat
are set with the program file. If they are not set with the program file, the data which is set up from
the "Set" menu on the browser window will be applied.
3. During displaying the image, you can switch the displayed image with the Point ed buttons, and
stop auto-playback with the Point 7 button. Refer to the control buttons as described in the table
on the next page.
Note:
During operating the memory viewer, the Network Viewer and Network Capture function cannot be used.
The program file does not support in the manual mode. Use it in the program mode.
Notes for Windows:
* The program file (.dpf ) is created with the program editor software. For further information, see the
item "Creating a program file [Program Editor]" (p.119) described on the separated network owner's
manual.
* The DispParam folder is automatically created when the program file with the program editor
is stored. For further information, see the item "Creating a program file [Program Editor]" (p.119)
described on the separated network owner's manual.
* When storing the program file into the USB thumb drive manually, create folder with the name of
"DispParam" and store the program file into this folder.
* In the program mode, the browser window lists the program files and folders only. Other files are
not listed.