HP StorageWorks 1200s - NAS Installation Manual page 7

Figure 16: Selecting Reactive Disk
NAS 1200s Installation Guide Addendum
i. After this procedure, the drives will need time to regenerate.
j. Do not shut down or restart the system until the Mirroring of C: or E: is complete. The
system can be shut down while the Data volume is still regenerating, but will have to
be restarted once the system is running. To do this, right-click the new disk, Disk 1 in
this example, and select Reactivate Disk, as shown in
k. After the drives are repaired and the system has been rebooted, right-click the Missing
disk and select Remove Disk if it is still being displayed in the Disk Management
MMC.
Replacing a failed hard drive
Figure 16.
Addendum Pg
5