HP StorageWorks 1200s - NAS Installation Manual page 4

Replacing a failed hard drive
Figure 8: Disk Management screen
Figure 9: Upgrade to Dynamic Disk dialog box
Figure 10: Remove Mirror dialog box
2
Addendum Pg
Ensure the appropriate disk is selected when the Upgrade to Dynamic Disk dialog box is
displayed.
d. Remove the mirror on the Missing disk. Right-click the Operating System Partition,
C: in this example, on the Missing disk and select Remove Mirror. In the Remove
Mirror dialog box, select the Missing disk and click Remove Mirror as shown in
Figure 10.
NAS 1200s Installation Guide Addendum