HP SN6000B Release Note page 18
Hp network advisor b-series enterprise, professional plus, and professional 11.1.1 release notes (5697-1209, september 2011-incl
Hide thumbs
Also See for SN6000B:
- Hardware reference manual (60 pages) ,
- Quick start instructions (8 pages) ,
- Reference manual (70 pages)
Table of Contents
Advertisement
• slptool findattrs service:wbem:https://IP_Address:Port
Use this command to verify that the Management application SMI Agent SLP service is properly
advertising its WBEM SLP template over the HTTPS protocol. Example input: slptool
findattrs service:wbem:https://10.0.1.2:5989
NOTE:
IP_Address:Port is the IP address and port number that display when you use the slptool
findsrvs service:wbem command.
SLP on UNIX systems
This section describes how to verify the SLP daemon on UNIX systems. The following are SLP file
locations on UNIX systems:
•
SLP log—Management_Application/cimom /cfg/slp.log
•
SLP daemon—Management_Application/cimom /cfg/slp.conf
The SLP daemon can be reconfigured by modifying SLP register—Management_Applica-
tion/cimom /cfg/slp.reg.
You can statically register an application that does not dynamically register with SLP using SLPAPIs
by modifying this file. For more information about these files, read the comments contained in them,
or see http://www.openslp.org/doc/html/UsersGuide/index.html.
Verifying SLP service installation and operation on UNIX systems:
1.
Open a command window.
2.
Enter % su root and press Enter to become the root user.
3.
Enter # Management_Application/cimom/bin/slptool findsrvs service:service-agent and press
Enter to verify the SLP service is running as a Service Agent (SA).
4.
Enter # < Management_Application >/cimom/bin/slptool findsrvs service:wbem and press Enter
to verify the SLP service is advertising its WBEM services.
5.
Select one of the following options to verify the SLP service is advertising the WBEM SLP template
over its configured client protocol adapters.
• Enter # Management_Application/cimom /bin/slptool findattrs service:wbem:http://IP_Ad-
dress:Port and press Enter.
• Enter # Management_Application/cimom /bin/slptool findattrs service:wbem:https://IP_Ad-
dress:Port and press Enter.
NOTE:
IP_Address:Port is the IP address and port number that display when you use the
slptool findsrvs service:wbem command.
SLP on Windows systems
This section describes how to verify the SLP daemon on Windows systems. The following are SLP file
locations:
18
Advertisement
Table of Contents
