HP StorageWorks P4000 Hardware Installation Instructions page 3

14. Install the RAM by pushing straight down on the RAM.
When the RAM is fully seated, the locking latches will lock in place
on each side of the RAM.
15. Install the air plenum back in place as shown.
16. Place the cover back on the unit.
17. Tighten the captive cover screw, and place the torx tool back in the
holder on the rear of the unit.
18. Place the storage node back in the rack, connect the Ethernet cable,
and power on the storage node.
Upgrading the SAN/iQ software
Upgrading HP LeftHand P4000s that are in a
management group
Continue with the software upgrade instructions in the 1-Gigabit to
10-Gigabit Ethernet Migration Instructions.
Upgrading HP LeftHand P4000s that are new
and/or not in a management group
1. Open the CMC and find the P4000s.
2. Log in to the first storage node you want to upgrade.
3. Click Storage Node Tasks on the Details tab and select Install
Software.
4. From the list, select the storage node that you want to upgrade. Use
the CTRL key to select multiple storage nodes to upgrade from the
list.
5. Select the radio button: Install file on selected nodes one at a time
(Recommended).
6. Click Browse to navigate to the folder where you copied the upgrade
or patch file.
7. Select the file and click Open Install File.
Focus returns to the Install Software window. When the file name
is present, the Install button becomes enabled.
8. Review the version and description to be sure that you are using
the correct upgrade file.
9. Click Install.
a. Select the check box in the Install Status window to have the
install messages automatically scroll. These messages can be
saved to a file.
b. (Optional) After the installation completes, click Save To File
and choose a name and location for the file.
After the installation completes, the system reboots. After the system
comes back online, it conducts a post-install qualification. After the
system passes the post-install qualification, the upgrade process is
complete.
10. Click Close when the installation on all the storage nodes is
completed.
Page 3