Monitoring Remote Snapshots; Monitoring Details From The Remote Snapshots Feature; Viewing Information In The Remote Snapshots Tab; Viewing The Status In The Remote Snapshot Details Window - HP StorageWorks P4000 User Manual

4. Click OK.
If the snapshot is not part of a
snapshot set
A confirmation message opens.
Click Delete Snapshot.

Monitoring remote snapshots

Information for monitoring remote snapshots is available from multiple sources. Remote snapshot
alarms and events are listed in the Alarms window and in the Events category for the management
group. You can also receive event notification through email and SNMP traps. For information about
configuring event notification, see the HP StorageWorks P4000 SAN Solution user guide.

Monitoring details from the Remote Snapshots feature

You can view information about each remote snapshot in both the Remote Snapshots tab and in the
Remote Snapshot Details window.

Viewing information in the Remote Snapshots tab

The Remote Snapshots tab displays a list of remote snapshots for each selected item in the navigation
window. You can view lists of remote snapshots by management group, cluster, volume, and snapshot
levels.
1. Select the appropriate item in the navigation window.
2. Click the Remote Snapshot tab.
The following fields appear:
% Complete—The incremental progress of the remote copy operation
Elapsed Time—The Incremental time of the copy operation
Data Copied—The Incremental quantity of data copied
Rate—The Rate at which data is being copied, or, when the remote snapshot is complete, the
average rate for the total operation
State—The Status of the operation

Viewing the status in the Remote Snapshot Details window

The Remote Snapshot Details window displays additional details about a remote snapshot.
1. In the tab window, select the Remote Snapshots tab.
2. Select a remote snapshot from the list of snapshots on the Remote Snapshots tab.
3. Click Remote Snapshot Tasks, and then select View Remote Snapshot Details.
26 Using Remote Copy
If the snapshot is part of a snapshot set
A warning message opens.
To delete all snapshots in the snapshot set, click Delete All
Associated Snapshots.
To delete only the snapshot you selected, click Delete Selected
Snapshot Only.
To cancel the deletion, click Cancel.