HP NetStorage 6000 Release Note page 5

DLT Autoloader 818: This device has a maximum native capacity of 320GB, and a compressed capacity
between 480GB and 640GB, depending on compression efficiency. On an HP NetStorage 6000 that is fully
loaded with 73GB drives, it is possible that the stored data will exceed the storage capacity of the tape
device. In such situations, split the data into at least two sets, and back up each data set separately.
Drive Rebuild Time: When rebuilding drives, it may take a long time to initialize a logical drive (RAID set)
containing 73GB drives. The rebuild time is dramatically affected by how much the logical drive is being
used for file serving operations at the time of initialization. This also applies to logical drives that have failed
over to a hot spare, and to the rebuild of a replaced drive.
Reboots after Drive Changes: When drives are removed, added, or replaced while the system is powered
down, it is normal for the device to execute two boot sequences when it is powered on. This is required to
synchronize the RAID controller with the new drive configuration.
IBM Tivoli NetView – This management application is no longer supported.
General Browser Issues
Performance: After changing NIC parameters and clicking Apply, the browser may appear to hang while
the operation completes. The delay in the system responding is a function of the number of NIC ports and
changes requested.
Performance: Browsing the directory tree, and deleting directories from within the configuration interface
can take a long time, depending on the number of files and directories stored on the system. During such
operations, the web browser may appear to hang.
Security warnings: Denying additional privileges to Hewlett-Packard in a security warning window in
Netscape generates additional security warning windows. Granting privileges in one of the succeeding
windows does not actually grant the privileges needed. You must grant privileges on the first security
warning window.